The renamed-variable table mapped `matrix_bridge_hookshot_jira_oauth_uri` to
`..._jira_oauth_client_secret`, the entry above it. Anyone hitting the
deprecation was told to rename their setting to a variable that means something
else entirely; the URI's replacement is `..._jira_oauth_redirect_uri`.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SEH3vxYSQ5SV4N5z61eyGT
`tasks/main.yml` opens with a block tagged `reset-hookshot-encryption`, and
Ansible runs tagged tasks unless tags are actually selected. A run that selects
no tags therefore reaches `tasks/reset_encryption.yml`: on a host where the
service does not exist yet it fails outright, and on one where it does it stops
the bridge and resets its crypto store without being asked to.
Users of the playbook are shielded from this only because the documented way to
run it always passes `--tags=setup-all,start`.
Adding `never` makes the block reachable only when its tag is explicitly
selected, which is what `--tags=reset-hookshot-encryption` in
docs/configuring-playbook-bridge-hookshot.md already does - that keeps working
unchanged, as selecting a tag by name overrides `never`.
The Molecule scenario no longer needs its `skip-tags` workaround, which is what
makes this verifiable: the scenario runs with no tags selected, and is green
with the workaround gone.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SEH3vxYSQ5SV4N5z61eyGT
Scenarios install their Galaxy dependencies with `force: true`, so two roles
running at once re-extract the same collections and roles into ~/.ansible and
pull them out from under each other mid-play. It surfaces as a collection that
was working moments earlier going missing:
the connection plugin 'community.docker.docker' was not found
Found while running five scenarios in parallel, where it cost a run.
ANSIBLE_HOME relocates both `collections/` and `roles/`, so one variable covers
both halves; the scenarios' ANSIBLE_ROLES_PATH workaround now follows it rather
than hardcoding ~/.ansible/roles. Left alone if already set, and unset in CI,
where each role runs in its own job and has nothing to collide with.
Verified by removing var/molecule-ansible-home entirely and running
matrix-alertmanager-receiver from cold: green through idempotence, with the
collections and roles landing under the per-role directory - which also shows
nothing was quietly relying on the shared ~/.ansible being populated.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SEH3vxYSQ5SV4N5z61eyGT
Hookshot is the widest HTTP surface of the bridges here - an appservice port
plus a `listeners` list whose entries appear or vanish with independent
switches - so the scenario asserts on that surface rather than on "it started".
The scenario configures NO third-party service. GitHub, GitLab, Jira and Figma
each need an account and a credential somewhere else, which is where a scenario
stops testing this repository (docs/molecule-testing.md). GitLab, which the role
turns on by default, is switched off and its absence from both config.yml and
the registration's namespaces is asserted. The generic webhooks listener needs
no credential from anyone, and is what gets exercised live: a POST to an unknown
hook id comes back as `{"ok":false,"error":"Webhook not found"}`, which only
Hookshot's own generic-webhook handler produces - an Express "Cannot POST" page
there would mean the port is Hookshot's but the service was never mounted on it.
Every port the scenario sets differs from both the role's default and Hookshot's
own, and the run asserts both halves: the webhooks, metrics and appservice ports
it chose all answer, and 9000/9001/9003/9993 - what the role would have used
instead - all refuse. Metrics are off in the role's defaults, so that listener
exists only because the scenario asked for it, and /metrics answers with
`hookshot_*` series that nothing else could have produced.
config.yml and registration.yml are parsed as YAML and asserted structurally, so
a value landing under the wrong key cannot pass as a substring match.
Two things the role made necessary:
- `tasks/main.yml` opens with a block tagged `reset-hookshot-encryption`, and
Ansible runs tagged tasks unless tags are actually selected - so any tagless
play hits it, and it stops `matrix-hookshot.service` before that service
exists. The scenario skips the tag, which is what the playbook effectively
does by always running with `--tags=setup-all,start`.
- The role reads `matrix_host_command_openssl`, which matrix-base defines.
matrix-bridge-appservice-irc reads it too, so it goes in the shared playbook
context rather than into this scenario.
Falsified by pointing the webhooks listener at 127.0.0.1 in the role's config
template - a change no file-level assertion can see. Every config and
registration assertion still passed, and the run failed at "Assert the generic
webhooks service is mounted on that listener" with "Port 9741 did not answer as
Hookshot's generic webhooks service". Reverted afterwards.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SEH3vxYSQ5SV4N5z61eyGT
Hookshot's end-to-bridge encryption needs MSC2409 and MSC3202 enabled
on the homeserver, but the playbook only turned them on for Meowlnir.
Hookshot's encryption defaults to the playbook-wide
`matrix_bridges_encryption_enabled` toggle, so turning that on gave
Hookshot encryption against a Synapse which was not set up for it, and
Hookshot then struggled in encrypted rooms.
The playbook already wires up Hookshot's other encryption prerequisite
(Valkey) and fails the run when the Redis settings are missing, so
being only half-automatic here was the odd one out.
Synapse sends the extra data only to appservices which ask for it in
their registration file, so turning these on affects no other
component.
The documentation told Hookshot users to set the two Synapse variables
by hand, and argued they should be enabled deliberately. That
contradicted what we already do for Meowlnir, so it is gone; the note
now matches the Meowlnir one and points out that other homeserver
implementations still need arranging by hand.
Closes https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/5506
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
6b4b7647e fixed this for synapse-usage-exporter only. A checkout owned by
a different user makes the git task fail from then on, either with a
permission error or with git's dubious-ownership protection, until
someone removes the directory on the host by hand. It gets into that
state when the matrix user's uid changes (a server migration or a restore
onto a differently numbered user), when an earlier clone ran as another
user, or when someone runs git as root inside the checkout.
Every other role cloning a repository onto the server was open to the
same failure, so ensure the checkout's ownership recursively before
updating it at the remaining 54 sites.
The three matrix-synapse ext clones also gain force=yes. They were the
only on-server clones without it, which left a checkout that an
interrupted run had half-written wedged, instead of repaired on the next
run.
matrix-matrixto used to clone as root into a directory that nothing ever
chowned, unlike every other role. It now becomes the matrix user too.
The Element Web and SchildiChat Web theme checkouts live on the Ansible
controller, where correcting ownership is not ours to do, so they merely
mark the checkout as a safe directory for git.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Part of adopting a uniform naming policy for bridge variables,
where the variable prefix matches the role directory name.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
Enabling matrix_hookshot_encryption_enabled configures the bridge side
correctly (registration flags, Valkey cache), but hookshot's encryption
also needs the homeserver to support and enable MSC2409 and MSC3202,
which are typically experimental features disabled by default. Nothing
documented that, so the resulting setup silently did not work.
Reference the MSCs in the variable's comment, and show the exact Synapse
settings in the hookshot documentation page. The playbook deliberately
does not auto-enable them: they are experimental homeserver-wide
features, and flipping them from a bridge toggle would be surprising.
Fixes#3861
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
* feat: support container_network=host across all roles + systemd templates
Mirror the pattern Slavi introduced for matrix-coturn (aafa8f0) across the
fork: every 'Ensure X container network is created' task gets a
'when: <var> not in ["", "host"]' guard so MDAD does not try to
docker_network create a network literally named 'host' (returns 403,
since host is a pre-defined Docker network).
Mirror the same guard in every systemd unit template that does
'ExecStartPre=docker network connect <addnet> <container>' loops over
matrix_<role>_container_additional_networks: skip the connects when the
container is on host networking (where additional --network attaches
are invalid).
Unblocks DiD setups where MDAD-managed containers share their host's
network namespace (matrix-mdad outer compose service joined to central
postgres/openldap networks) to reach external services on the outer
Docker daemon.
* Simplify container network guards (!= 'host') and fix duplicate when
Guarding on the empty string ('') as well was misleading: systemd unit
templates still render an unconditional --network= flag, so an empty
network value produces a broken docker create command. Only 'host' is
actually supported, so only guard on that. This also matches the
existing convention in the Traefik role
(when: traefik_container_network != 'host').
Also fix a duplicate when key in the meshtastic-relay role, where the
network-creation task already had a when condition - the two are now
combined into a list.
Co-Authored-By: Claude Fable 5 <noreply@anthropic.com>
---------
Co-authored-by: Slavi Pantaleev <slavi@devture.com>
Co-authored-by: Claude Fable 5 <noreply@anthropic.com>
Replaces `community.docker.docker_image` with the modern
`docker_image_pull` and `docker_image_build` split modules. Drops the
`ansible_version` compatibility ladder and the now-redundant
`_container_image_force_pull` variable (the new pull module handles
registry refresh natively via `pull: always`). Also registers
`_container_image_build_result` so that a self-build rebuild correctly
triggers a service restart.
Related to https://github.com/spantaleev/matrix-docker-ansible-deploy/issues/5191.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
For each of the 34 roles (3 clients, 9 bots, 22 bridges), this commit:
- Adds `_restart_necessary: false` default variable
- Adds `register:` directives to config/image/systemd tasks
- Computes `_restart_necessary` via set_fact (OR of all .changed results)
- Wires `(_restart_necessary | bool)` in group_vars/matrix_servers
This allows the systemd service manager to skip unnecessary restarts
when running install-* tags and nothing actually changed.
Service roles and complex multi-service roles will follow separately.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
This:
- brings consistency - no more mixing `_name_prefix` and `_registry_prefix`
- adds extensibility - a future patch will allow reconfiguring all registry prefixes for all roles in the playbook
We still have `_docker_` vs `_container_` inconsistencies.
These may be worked on later.
Based on docs/configuring-playbook-alertmanager-receiver.md
We can re-sort the levels it if is found out that debug should be placed at the first.
Signed-off-by: Suguru Hirahara <acioustick@noreply.codeberg.org>
* set localpart of hookshot bot in main.yml
* set sender_localpart in registration.yml.j2 template to variable
* prettier location for bot localpart in main.yml
* Update main.yml
* Update registration.yml.j2
---------
Co-authored-by: Slavi Pantaleev <slavi@devture.com>