elysium/CHANGELOG.md

Changelog

All notable changes to the Elysium project are documented in this file.

Starting with v2.2.0, Elysium uses a unified project version. All scripts, settings templates, and documentation share the same version number so operators can verify consistency at a glance. Releases prior to v2.2.0 used per-script versioning; those entries are preserved below under their original dates.

---

[2.4.1] — 2026-06-09

Fixed

• Test-ReplicationPermissions and Test-DCClockSkew now URI-escape Distinguished Names via [System.Uri]::EscapeDataString before embedding them in DirectoryEntry LDAP URLs. DNs containing /, #, or other reserved characters previously caused URL mis-parsing and constructor failures.

---

[2.4.0] — 2026-06-09

Added

• DC clock skew pre-flight check (Test-DCClockSkew in Elysium.Common.ps1): compares the local machine clock against the target DC's RootDSE.currentTime before attempting DCSync. Warns if skew exceeds 300s (Kerberos hard limit) or 60s (approaching limit), and provides the w32tm /resync /force remediation command.
• SDProp protection warning in Test-ReplicationPermissions: detects adminCount=1 on the service account and warns that SDProp runs every 60 minutes and may silently revert replication rights or group memberships.
• Protected Users group warning in Test-ReplicationPermissions: detects membership in the Protected Users group (RID 525) and warns that it restricts Kerberos delegation and RC4 authentication required by DSInternals for DRS replication.

Fixed

• DSInternals auto-update flow now uses Install-Module -Force -AllowClobber instead of Update-Module to avoid a PowerShellGet bug where null PublishedDate metadata causes "cannot convert null to type system.datetime".

---

[2.3.0] — 2026-06-09

Added

• Test-WeakADPasswords.ps1 now checks the installed DSInternals version at startup:
  • v6.2 (unsigned) is flagged with a warning explaining that unsigned native DLLs are blocked and replication will fail. Remediation: Update-Module DSInternals.
  • Below v7.0 triggers an interactive prompt offering to run Update-Module DSInternals -Force automatically. If accepted, the script updates the module and exits cleanly so the operator can re-run with the new version loaded.
  • v7.0+ is required because it fixes intermittent CRC errors mid-replication and Test-PasswordQuality result truncation bugs.

---

[2.2.5] — 2026-06-09

Fixed

• The DSInternals Zone.Identifier block error message (added in v2.2.4) now dynamically resolves the actual DSInternals module path via Get-Module instead of hardcoding $env:ProgramFiles\WindowsPowerShell\DSInternals. The Unblock-File command in the error now points to the correct installation directory.

---

[2.2.4] — 2026-06-09

Fixed

• Test-ReplicationPermissions (in Elysium.Common.ps1) now skips InheritOnly ACEs when evaluating replication rights. An ACE marked InheritOnly applies only to child objects, not the domain root itself, so it does not grant the required extended rights for DCSync on the domain object.
• Import-CompatModule (in Test-WeakADPasswords.ps1) now detects DSInternals being blocked by Windows Zone.Identifier (alternate data stream from internet download) and throws a clear, actionable error with the exact Unblock-File command to run. Previously this surfaced as an opaque non-FIPS warning.

---

[2.2.3] — 2026-06-09

Fixed

• Test-ReplicationPermissions (in Elysium.Common.ps1) now correctly recognizes GenericAll and blanket ExtendedRight (empty ObjectType) ACEs as satisfying replication permission requirements. Previously, only exact GUID-matched ExtendedRight ACEs were detected, causing false negatives when rights were granted via broader permissions.
• Improved error diagnostics: the missing-rights message now indicates whether an ACE for the specific right exists on the domain object but is not assigned to the caller, versus no ACE existing at all.

---

[2.2.2] — 2026-06-09

Fixed

• Test-ReplicationPermissions (in Elysium.Common.ps1) now resolves the caller's effective token SIDs via the tokenGroups constructed attribute instead of walking MemberOf directly. This correctly accounts for nested group memberships and avoids false-positive "missing permissions" errors when the account is entitled through nested groups.

---

[2.2.1] — 2026-06-09

Changed

• DRY refactoring — shared helpers consolidated into Elysium.Common.ps1:
  • Moved Read-KeyValueSettingsFile, Read-ElysiumSettings, and Get-SettingsValue from Prepare-KHDBStorage.ps1 and Update-KHDB.ps1 into the common helper.
  • Moved Build-BlobUri and Azure URI helpers from Update-KHDB.ps1 into the common helper.
  • Moved Get-FunctionDefinitionText from all scripts that duplicated it into the common helper.
  • Moved Get-ValidatedADCredential and Test-ReplicationPermissions from Test-WeakADPasswords.ps1 into the common helper.
  • Moved all native S3 SigV4 helpers (Ensure-AWSS3Module, New-S3Client, HmacSha256, GetSignatureKey, BuildAuthHeaders, BuildS3Uri, etc.) from Extract-NTHashes.ps1 into the common helper.
• Test-WeakADPasswords.ps1 and Extract-NTHashes.ps1 now import Elysium.Common.ps1 (they previously did not), reducing duplication and ensuring consistent behavior.
• Update-KHDB.ps1 and Prepare-KHDBStorage.ps1 removed their local copies of helpers already available in the common module.
• Removed legacy Settings.ps1 (superseded by ElysiumSettings.txt).
• Minor cleanup: removed stray placeholder comment in Elysium.ps1.

---

[2.2.0] — 2026-06-09

Changed

• Unified versioning: All PowerShell scripts, the settings template, and documentation now share a single project version (2.2.0). This replaces the previous per-script versioning model.

Test-WeakADPasswords.ps1

• Added Test-ReplicationPermissions helper that validates the three required AD replication extended rights (Replicating Directory Changes, Replicating Directory Changes All, Replicating Directory Changes In Filtered Set) against the domain object's DACL before attempting DCSync. Missing permissions now produce a clear, fail-fast error instead of an opaque Access is denied later in the workflow.

---

Historical Releases (per-script versioning)

2026-03-16

Test-WeakADPasswords.ps1 v1.4.5

Fixed:

• Normalizes legacy HASH:count KHDB files into a temporary hash-only list before calling DSInternals, so dictionary matches no longer fail silently when clients have older database content.
• Warns when KHDB normalization is required instead of leaving the weak-password match section empty without explanation.

Update-KHDB.ps1 v2.1.1

Fixed:

• Rebuilds the merged local khdb.txt as a DSInternals-compatible hash-only file even when upstream shards still contain legacy HASH:count lines.
• Tightened KHDB merge validation so malformed shard content is surfaced during update rather than producing a silently unusable weak-password database.

Prepare-KHDBStorage.ps1 v1.1.1

Fixed:

• Accepts legacy HASH:count source input but writes deduplicated hash-only shards for downstream DSInternals consumers.

README.md

Changed:

• Corrected the KHDB format documentation to require one NT hash per line and documented the automatic legacy-format normalization.

2026-02-17

Test-WeakADPasswords.ps1 v1.4.4

Changed:

• Added startup FIPS policy detection (HKLM:\SYSTEM\CurrentControlSet\Control\Lsa\FipsAlgorithmPolicy\Enabled) with fail-fast behavior and explicit remediation steps to avoid opaque DSInternals runtime failures.

Test-WeakADPasswords.ps1 v1.4.3

Fixed:

• Added explicit handling for Microsoft.PowerShell.Commands.WriteErrorException,DSInternals.Bootstrap.psm1 so known FIPS bootstrap errors are downgraded to a controlled warning when possible, with a clear fail message if DSInternals cannot load under policy.

Test-WeakADPasswords.ps1 v1.4.2

Fixed:

• DSInternals module import now handles the known FIPS bootstrap warning as non-fatal when the module successfully loads, preventing repeated SecurityError noise during startup.

Test-WeakADPasswords.ps1 v1.4.1

Changed:

• Added credential pre-validation against the selected domain controller before running Get-ADReplAccount, including retry prompts for rejected credentials.
• Improved error diagnostics to distinguish invalid credentials from missing replication permissions (Access is denied).
• Added optional -Credential parameter to Test-WeakADPasswords for callers that need to provide credentials non-interactively.

README.md

Changed:

• Updated weak-password testing documentation to reflect credential pre-check behavior and added a short troubleshooting section for common authentication/permissions failures.

2025-10-30

Update-KHDB.ps1 v2.0.0

Changed:

• Replaced single-archive workflow with manifest-driven, two-hex shard downloads that verify SHA256/size before in-place updates.
• Added incremental refresh logic, stale shard cleanup, and automatic rebuild of the merged khdb.txt for downstream scripts.
• Hardened validation to stream-check merged output while preserving strict TLS, retry, and transcript behaviour.

ElysiumSettings.txt.sample v1.3.0

Added:

• Documented KhdbManifestPath, KhdbShardPrefix, and KhdbLocalShardDir defaults for the shard-aware updater.

README.md

Changed:

• Described the manifest/shard update flow so operators understand the incremental download model and automatic cleanup.

Prepare-KHDBStorage.ps1 v1.0.0

Added:

• Helper script to split khdb.txt (or a directory/list of .gz HIBP slices) into two-hex shards, build the JSON manifest, and push the package to Azure Blob Storage or S3-compatible endpoints.
• Validation step that tallies and quarantines malformed hashes before sharding, writing invalid-hashes.txt plus a console summary so bad data never reaches storage.
• Optional -ShowProgress mode emitting periodic Write-Progress updates (interval configurable) so large ingests visibly tick forward.
• Automatic reconstruction of HIBP NTLM hashes (file-prefix + suffix) so partially stored hashes still produce full 32-hex values in the shards, plus per-prefix deduplication that keeps the highest observed count.
• -ForcePlainText switch to skip .gz expansions entirely and treat the source as pre-built hash lines (skipped entries are reported separately).
• Emits a merged khdb-clean.txt alongside the shards for DSInternals or offline review, including SHA256 fingerprints for both manifest and clean output.
• Automatic checkpoint/resume when -ForcePlainText is used (configurable via -CheckpointPath, disable with -NoCheckpoint) so large ingests can be paused and resumed without reprocessing prior shards.

2025-10-26

Test-WeakADPasswords.ps1 v1.3.3

Added:

• Opt-in usage beacon that fires a single HTTP request (GET/POST/PUT) after settings load, suitable for pre-signed S3 URLs, and only includes script name, version, and a UTC timestamp (plus optional instance ID).
• Instance identifier header/body support and configurable timeout so adopters can differentiate deployments without collecting user data.

ElysiumSettings.txt.sample v1.2.0

Added:

• Documented UsageBeacon* keys (URL, method, instance ID, timeout) so telemetry stays disabled by default but easy to enable.

README.md

Added:

• Usage beacon section explaining how to configure the lightweight tracking call and what metadata is transmitted.

2025-10-21

Extract-NTHashes.ps1 v1.2.1

Fixed:

• Corrected SigV4 host header formatting so non-default ports serialize without parser errors.
• Hardened hashing helpers to avoid ComputeHash overload ambiguity under Windows PowerShell.
• Domain selection menu now respects the configured numeric order.

Test-WeakADPasswords.ps1 v1.3.2

Changed:

• Switched to the sorted KHDB path when driving Test-PasswordQuality, eliminating full linear scans and avoiding malformed-line crashes on massive datasets.

Test-WeakADPasswords.ps1 v1.3.1

Fixed:

• Domain picker now renders in numeric order from settings for predictable operator workflows.
• UPN export now relies on structured weak-password results, so dictionary hit UPN lists are populated reliably.

2025-10-10

Test-WeakADPasswords.ps1 v1.3.0

Added:

• CheckOnlyEnabledUsers flag wired from settings to filter accounts prior to Test-PasswordQuality.
• Transcript logging to Reports/logs/test-weakad-<timestamp>.log.

Extract-NTHashes.ps1 v1.2.0

Added:

• Transcript logging to Reports/logs/extract-hashes-<timestamp>.log.

Elysium.ps1 v1.1.0

Updated:

• Added strict error handling ($ErrorActionPreference='Stop') and Set-StrictMode.
• Resolved script invocations via $PSScriptRoot to avoid CWD issues.

Elysium.ps1 v1.2.0

Added:

• Transcript logging to Reports/logs/orchestrator-<timestamp>.log and graceful shutdown without exit.

Uninstall.ps1 v1.1.0

Added:

• Transcript logging to %TEMP%/Elysium/logs/uninstall-<timestamp>.log so logs persist after directory removal.

Update-KHDB.ps1 v1.1.0

Added/Updated:

• Robust settings validation and SAS token normalization.
• Safe URL construction with UriBuilder and custom User-Agent.
• TLS 1.2 enforced; HttpClient timeout and retry with backoff for transient errors.
• Download progress for both known and unknown content length.
• Atomic-ish update: download to temp, extract, validate, backup existing khdb.txt, then replace.
• KHDB validation: format check (32-hex), deduplication and normalization.
• Transcript logging to Reports/logs/update-khdb-<timestamp>.log.

Test-WeakADPasswords.ps1 v1.2.0

Updated:

• Enforced modules via #Requires; removed runtime installs.
• Added strict mode and error preference.
• Resolved paths relative to $PSScriptRoot (settings, KHDB, reports).
• Ensured report directory creation and sane defaults (Reports).
• Removed stray top-level loop; UPN enrichment occurs during report generation only.

Extract-NTHashes.ps1 v1.1.0

Updated:

• Enforced modules via #Requires; added strict mode.
• Fixed variable ordering bug and unified filename scheme with domain prefix.
• Implemented PBKDF2 (HMAC-SHA256, 100k iterations) + random salt for AES-256-CBC encryption; header ELY1|salt|iv.
• Normalized SAS token and verified container existence; checksum verified before cleanup; artifacts retained on failure.
• Paths resolved relative to $PSScriptRoot; ensured report base directory exists.

ElysiumSettings.txt.sample v1.1.0

Updated:

• ReportPathBase default changed to Reports (relative) and added guidance on required modules and replication rights.
• Added optional CheckOnlyEnabledUsers=true example flag.

Extract-NTHashes.ps1

version 1.1.1

Updated:

• UPNs of the accounts with passwords found in dictionary were moved into separate report (one UPN at a line) to enable further automation.

version 1.1.0

Added:

• UPN retrieval (this will prolong the time needed to run the script significantly)
• Better error handling