cqrenet/relay
3
0
Fork 0
mirror of https://github.com/chatmail/relay.git synced 2026-05-10 07:54:36 +00:00
Code Issues Packages Projects Releases Wiki Activity

Proxy example for FreeBSD/pf

Browse Source
This commit is contained in:
Mark Felder
2025-11-19 10:45:57 -08:00
committed by holger krekel
parent fa5a6a64b3
commit 9e6e3af534
1 changed files with 63 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

65
doc/source/proxy.rst
View File

@@ -22,7 +22,12 @@ Note that your chatmail relay still needs to be able to make outgoing
connections on port 25 to send messages outside.
To setup a reverse proxy (or rather Destination NAT, DNAT) for your
chatmail relay, put the following configuration in
chatmail relay, follow these instructions:
Linux
^^^^^
Put the following configuration in
``/etc/nftables.conf``:
::
@@ -110,5 +115,61 @@ Uncomment in ``/etc/sysctl.conf`` the following two lines:
Then reboot the relay or do ``sysctl -p`` and
``nft -f /etc/nftables.conf``.
Once proxy relay is set up, you can add its IP address to the DNS.
FreeBSD / pf
^^^^^^^^^^^^
Put the following configuration in
``/etc/pf.conf``:
::
ext_if = "em0"
forward_ports = "{ 25, 80, 143, 443, 465, 587, 993 }"
chatmail_ipv4 = "AAA.BBB.CCC.DDD"
icmp_types = "{ echoreq, echorep, unreach, timex }"
chatmail_ipv6 = "XXX::1"
icmp6_types = "{ echorep, echoreq, neighbradv, neighbrsol, routeradv, routersol, unreach, toobig, timex }"
set skip on lo0
nat on $ext_if inet from any to any -> ($ext_if:0)
nat on $ext_if inet6 from any to any -> ($ext_if:0)
# Define the redirect rules
rdr on $ext_if inet proto tcp from any to ($ext_if:0) port $forward_ports -> $chatmail_ipv4
rdr pass on $ext_if inet6 proto tcp from any to ($ext_if) port $forward_ports -> $chatmail_ipv6
# Accept the incoming traffic to the specified ports we will NAT redirect
pass in quick on $ext_if inet proto tcp from any to any port $forward_ports flags S/SA modulate state
pass in quick on $ext_if inet6 proto tcp from any to any port $forward_ports flags S/SA modulate state
# Allow incoming SSH for host mgmt
pass in quick on $ext_if proto tcp from any to ($ext_if) port 22 flags S/SA modulate state
# Allow ICMP
pass in quick on $ext_if inet proto icmp all icmp-type $icmp_types keep state
pass in quick on $ext_if inet6 proto ipv6-icmp all icmp6-type $icmp6_types keep state
# Allow traffic from anyone to go through the NAT
pass on $ext_if inet proto tcp from any to $chatmail_ipv4 flags S/SA modulate state
pass on $ext_if inet6 proto tcp from any to $chatmail_ipv6 flags S/SA modulate state
# Default allow out
pass out quick on $ext_if from any to any
# Default block
block drop in log all
Insert into ``/etc/sysctl.conf.local`` the following two lines:
::
net.inet.ip.forwarding=1
net.inet6.ip6.forwarding=1
Activate the sysctls with ``service sysctl onestart``.
Enable the pf firewall with ``service pf enable``.
Apply the firewall rules with ``service pf start`` or ``pfctl -f /etc/pf.conf``.
Note, enabling the firewall may interrupt your SSH session, but you can reconnect.
Once proxy relay is set up, you can add its IP address to the DNS.