tried to write a test to test exceeded quota, but not sure delta even gets a proper error on recipient's full mailbox

README.md

@@ -1,40 +1,60 @@
 # Chat Mail server configuration
 
-This repository setups a ready-to-go chatmail instance
-comprised of a minimal setup of the battle-tested 
-[postfix smtp server](https://www.postfix.org) and [dovecot imap server](https://www.dovecot.org).
+This package deploys Postfix and Dovecot servers, including OpenDKIM for DKIM signing.
+
+Postfix uses Dovecot for authentication as described in <https://www.postfix.org/SASL_README.html#server_dovecot>
 
 ## Getting started 
 
-1. prepare your local system:
+prepare:
 
-    scripts/init.sh 
-
-2. set environment variable to the chatmail domain you want to setup:
-
-    export CHATMAIL_DOMAIN=c1.testrun.org   # replace with your host
-
-3. run the deploy of the chat mail instance: 
-
-    scripts/deploy.sh 
+    pip install -e chatmail-infra
 
 
-## Running tests and benchmarks (offline and online) 
+then run with pyinfra command line tool: 
 
-1. Set `CHATMAIL_SSH` so that `ssh root@$CHATMAIL_SSH` allows 
-   to login to the chatmail instance server. 
+    CHATMAIL_DOMAIN=c1.testrun.org pyinfra --ssh-user root c1.testrun.org deploy.py
 
-2. To run local and online tests: 
 
-    scripts/test.sh 
+## Structure (wip)
+```
 
-3. To run benchmarks against your chatmail instance: 
+# package doveauth tool and deploy chatmail server to a envvar-specified ssh-reachable host 
+deploy.py 
 
-    scripts/bench.sh 
+# chatmail pyinfra deploy package 
+chatmail-pyinfra 
+    pyproject.toml
+    chatmail/__init__ ...
 
-## Running tests (offline and online) 
+# doveauth tool used by dovecot's auth mechanism on the host system 
+doveauth
+    README.md
+    pyproject.toml
+    doveauth.py
+    test_doveauth.py
+
+# lmtp server to block (outgoing) unencrypted messages 
+filtermail 
+    README.md
+    pyproject.toml
+    .... 
+
+# online tests (after deploy)
+
+online-tests  # runnable via pytest 
+
+
+
+# scripts for setup/development/deployment 
+
+scripts/
+    init.sh  # create venv/other perequires
+    deploy.sh  # run pyinfra based deploy of everything
+    test.sh # run all local and online tests 
 
 ```
+
 ## Dovecot/Postfix configuration
 
 ### Ports
@@ -44,16 +64,4 @@ Dovecot listens on ports 143(imap) and 993 (imaps).
 
 ## DNS
 
-For DKIM you must add a DNS entry as found in /etc/opendkim/selector.txt on your chatmail instance.
-The above `scripts/deploy.sh` prints out the DKIM selector and DNS entry you
-need to setup with your DNS provider. 
-
-## Emergency Commands
-
-If you need to stop account creation,
-e.g. because some script is wildly creating accounts,
-just run `touch /tmp/nocreate`.
-You can remove the file
-as soon as the attacker was banned
-by different means.
-
+For DKIM you must add a DNS entry as in /etc/opendkim/selector.txt (where selector is the opendkim_selector configured in the chatmail inventory).

chatmaild/pyproject.toml

@@ -10,6 +10,7 @@ dependencies = [
 ]
 
 [project.scripts]
+doveauth = "chatmaild.doveauth:main"
 doveauth-dictproxy = "chatmaild.dictproxy:main"
 filtermail = "chatmaild.filtermail:main"
 

chatmaild/src/chatmaild/dictproxy.py

@@ -1,4 +1,3 @@
-import logging
 import os
 import sys
 import json
@@ -12,8 +11,6 @@ import subprocess
 
 from .database import Database
 
-NOCREATE_FILE = "/etc/chatmail-nocreate"
-
 
 def encrypt_password(password: str):
     password = password.encode("ascii")
@@ -30,9 +27,6 @@ def encrypt_password(password: str):
 
 
 def create_user(db, user, password):
-    if os.path.exists(NOCREATE_FILE):
-        logging.warning(f"Didn't create account: {NOCREATE_FILE} exists. Delete the file to enable account creation.")
-        return
     with db.write_transaction() as conn:
         conn.create_user(user, password)
     return dict(home=f"/home/vmail/{user}", uid="vmail", gid="vmail", password=password)
@@ -101,7 +95,7 @@ def main():
             while True:
                 msg = self.rfile.readline().strip().decode()
                 if not msg:
-                    break
+                    continue
                 res = handle_dovecot_request(msg, db)
                 if res:
                     print(f"sending result: {res!r}", file=sys.stderr)

chatmaild/src/chatmaild/doveauth.py

@@ -0,0 +1,65 @@
+#!/usr/bin/env python3
+import base64
+import sys
+
+from .database import Database
+
+
+def get_user_data(db, user):
+    with db.read_connection() as conn:
+        result = conn.get_user(user)
+    if result:
+        result["uid"] = "vmail"
+        result["gid"] = "vmail"
+    return result
+
+
+def create_user(db, user, password):
+    with db.write_transaction() as conn:
+        conn.create_user(user, password)
+    return dict(home=f"/home/vmail/{user}", uid="vmail", gid="vmail", password=password)
+
+
+def verify_user(db, user, password):
+    userdata = get_user_data(db, user)
+    if userdata:
+        if userdata.get("password") == password:
+            userdata["status"] = "ok"
+        else:
+            userdata["status"] = "fail"
+    else:
+        userdata = create_user(db, user, password)
+        userdata["status"] = "ok"
+
+    return userdata
+
+
+def lookup_user(db, user):
+    userdata = get_user_data(db, user)
+    if userdata:
+        userdata["status"] = "ok"
+    else:
+        userdata["status"] = "fail"
+    return userdata
+
+
+def dump_result(res):
+    for key, value in res.items():
+        print(f"{key}={value}")
+
+
+def main():
+    db = Database("/home/vmail/passdb.sqlite")
+    if sys.argv[1] == "hexauth":
+        login = base64.b16decode(sys.argv[2]).decode()
+        password = base64.b16decode(sys.argv[3]).decode()
+        res = verify_user(db, login, password)
+        dump_result(res)
+    elif sys.argv[1] == "hexlookup":
+        login = base64.b16decode(sys.argv[2]).decode()
+        res = lookup_user(db, login)
+        dump_result(res)
+
+
+if __name__ == "__main__":
+    main()

chatmaild/src/chatmaild/filtermail.py

@@ -9,8 +9,9 @@ from aiosmtpd.controller import UnixSocketController
 from smtplib import SMTP as SMTPClient
 
 
-def check_encrypted(message):
+def check_encrypted(content):
     """Check that the message is an OpenPGP-encrypted message."""
+    message = BytesParser(policy=policy.default).parsebytes(content)
     if not message.is_multipart():
         return False
     if message.get("subject") != "...":
@@ -46,8 +47,7 @@ class ExampleHandler:
 
         valid_recipients = []
 
-        message = BytesParser(policy=policy.default).parsebytes(envelope.content)
-        mail_encrypted = check_encrypted(message)
+        mail_encrypted = check_encrypted(envelope.content)
 
         res = []
         for recipient in envelope.rcpt_tos:
@@ -68,13 +68,7 @@ class ExampleHandler:
                 continue
 
             is_outgoing = recipient_local_domain[1] != my_local_domain[1]
-
-            if (
-                is_outgoing
-                and not mail_encrypted
-                and message.get("secure-join") != "vc-request"
-                and message.get("secure-join") != "vg-request"
-            ):
+            if is_outgoing and not mail_encrypted:
                 res += ["500 Outgoing mail must be encrypted"]
                 continue
 

chatmaild/src/chatmaild/test_doveauth.py

@@ -1,9 +1,7 @@
-import os
-
 import pytest
 
-import chatmaild.dictproxy
-from .dictproxy import get_user_data, lookup_passdb
+from .dictproxy import get_user_data
+from .doveauth import verify_user
 from .database import Database, DBError
 
 
@@ -15,31 +13,16 @@ def db(tmpdir):
 
 
 def test_basic(db):
-    chatmaild.dictproxy.NOCREATE_FILE = "/tmp/nocreate"
-    if os.path.exists(chatmaild.dictproxy.NOCREATE_FILE):
-        os.remove(chatmaild.dictproxy.NOCREATE_FILE)
-    lookup_passdb(db, "link2xt@c1.testrun.org", "asdf")
+    verify_user(db, "link2xt@c1.testrun.org", "asdf")
     data = get_user_data(db, "link2xt@c1.testrun.org")
     assert data
 
 
-def test_dont_overwrite_password_on_wrong_login(db):
-    """Test that logging in with a different password doesn't create a new user"""
-    res = lookup_passdb(db, "newuser1@something.org", "kajdlkajsldk12l3kj1983")
-    assert res["password"]
-    res2 = lookup_passdb(db, "newuser1@something.org", "kajdlqweqwe")
-    # this function always returns a password hash, which is actually compared by dovecot.
-    assert res["password"] == res2["password"]
-
-
-def test_nocreate_file(db):
-    chatmaild.dictproxy.NOCREATE_FILE = "/tmp/nocreate"
-    with open(chatmaild.dictproxy.NOCREATE_FILE, "w+") as f:
-        f.write("")
-    assert os.path.exists(chatmaild.dictproxy.NOCREATE_FILE)
-    lookup_passdb(db, "newuser1@something.org", "kajdlqweqwe")
-    assert not get_user_data(db, "newuser1@something.org")
-    os.remove(chatmaild.dictproxy.NOCREATE_FILE)
+def test_verify_or_create(db):
+    res = verify_user(db, "newuser1@something.org", "kajdlkajsldk12l3kj1983")
+    assert res["status"] == "ok"
+    res = verify_user(db, "newuser1@something.org", "kajdlqweqwe")
+    assert res["status"] == "fail"
 
 
 def test_db_version(db):

chatmaild/src/chatmaild/test_filtermail.py

@@ -1,16 +1,12 @@
+import pytest
+
 from .filtermail import check_encrypted
-from email.parser import BytesParser
-from email import policy
 
 
 def test_filtermail():
-    def check_encrypted_bstr(content):
-        message = BytesParser(policy=policy.default).parsebytes(content)
-        return check_encrypted(message)
+    assert not check_encrypted(b"foo")
 
-    assert not check_encrypted_bstr(b"foo")
-
-    assert not check_encrypted_bstr(
+    assert not check_encrypted(
         "\r\n".join(
             [
                 "Subject: =?utf-8?q?Message_from_foobar=40c2=2Etestrun=2Eorg?=",
@@ -40,7 +36,7 @@ def test_filtermail():
         ).encode()
     )
 
-    assert not check_encrypted_bstr(
+    assert not check_encrypted(
         "\r\n".join(
             [
                 "Subject: =?utf-8?q?Message_from_foobar=40c2=2Etestrun=2Eorg?=",
@@ -71,7 +67,7 @@ def test_filtermail():
     )
 
     # https://xkcd.com/1181/
-    assert not check_encrypted_bstr(
+    assert not check_encrypted(
         "\r\n".join(
             [
                 "Subject: =?utf-8?q?Message_from_foobar=40c2=2Etestrun=2Eorg?=",
@@ -103,7 +99,7 @@ def test_filtermail():
         ).encode()
     )
 
-    assert check_encrypted_bstr(
+    assert check_encrypted(
         "\r\n".join(
             [
                 "Subject: ...",
@@ -176,7 +172,7 @@ def test_filtermail():
         ).encode()
     )
 
-    assert not check_encrypted_bstr(
+    assert not check_encrypted(
         "\r\n".join(
             [
                 "Subject: Buy Penis Enlargement at www.malicious-domain.com",
@@ -249,7 +245,7 @@ def test_filtermail():
         ).encode()
     )
 
-    assert not check_encrypted_bstr(
+    assert not check_encrypted(
         "\r\n".join(
             [
                 "Subject: Message opened",

deploy-chatmail/src/deploy_chatmail/__init__.py

@@ -110,7 +110,7 @@ def _configure_opendkim(domain: str, dkim_selector: str) -> bool:
     return need_restart
 
 
-def _configure_postfix(domain: str, debug: bool = False) -> bool:
+def _configure_postfix(domain: str) -> bool:
     """Configures Postfix SMTP server."""
     need_restart = False
 
@@ -124,20 +124,21 @@ def _configure_postfix(domain: str, debug: bool = False) -> bool:
     )
     need_restart |= main_config.changed
 
-    master_config = files.template(
-        src=importlib.resources.files(__package__).joinpath("postfix/master.cf.j2"),
+    master_config = files.put(
+        src=importlib.resources.files(__package__)
+        .joinpath("postfix/master.cf")
+        .open("rb"),
         dest="/etc/postfix/master.cf",
         user="root",
         group="root",
         mode="644",
-        debug=debug,
     )
     need_restart |= master_config.changed
 
     return need_restart
 
 
-def _configure_dovecot(mail_server: str, debug: bool = False) -> bool:
+def _configure_dovecot(mail_server: str) -> bool:
     """Configures Dovecot IMAP server."""
     need_restart = False
 
@@ -148,7 +149,6 @@ def _configure_dovecot(mail_server: str, debug: bool = False) -> bool:
         group="root",
         mode="644",
         config={"hostname": mail_server},
-        debug=debug,
     )
     need_restart |= main_config.changed
     auth_config = files.put(
@@ -160,16 +160,6 @@ def _configure_dovecot(mail_server: str, debug: bool = False) -> bool:
     )
     need_restart |= auth_config.changed
 
-    files.put(
-        src=importlib.resources.files(__package__)
-        .joinpath("dovecot/expunge.cron")
-        .open("rb"),
-        dest="/etc/cron.d/expunge",
-        user="root",
-        group="root",
-        mode="644",
-    )
-
     return need_restart
 
 
@@ -215,9 +205,8 @@ def deploy_chatmail(mail_domain: str, mail_server: str, dkim_selector: str) -> N
     )
 
     _install_chatmaild()
-    debug = False
-    dovecot_need_restart = _configure_dovecot(mail_server, debug=debug)
-    postfix_need_restart = _configure_postfix(mail_domain, debug=debug)
+    dovecot_need_restart = _configure_dovecot(mail_server)
+    postfix_need_restart = _configure_postfix(mail_domain)
     opendkim_need_restart = _configure_opendkim(mail_domain, dkim_selector)
 
     systemd.service(

deploy-chatmail/src/deploy_chatmail/acmetool/__init__.py

@@ -50,8 +50,8 @@ def deploy_acmetool(nginx_hook=False, email="", domains=[]):
     systemd.service(
         name="Setup acmetool-redirector service",
         service="acmetool-redirector.service",
-        running=False,
-        enabled=False,
+        running=True,
+        enabled=True,
         restarted=service_file.changed,
     )
 

deploy-chatmail/src/deploy_chatmail/dovecot/dovecot.conf.j2

@@ -4,23 +4,14 @@ protocols = imap lmtp
 
 auth_mechanisms = plain
 
-{% if debug == true %}
-auth_verbose = yes
-auth_debug = yes
-auth_debug_passwords = yes
-auth_verbose_passwords = plain
-auth_cache_size = 100M
-mail_debug = yes
-{% endif %}
-
-
 mail_plugins = quota
+mail_debug = yes
 
-# these are the capabilities Delta Chat cares about actually 
-# so let's keep the network overhead per login small
-# https://github.com/deltachat/deltachat-core-rust/blob/master/src/imap/capabilities.rs
-imap_capability = IMAP4rev1 IDLE MOVE QUOTA CONDSTORE
-
+# uncomment this if you want to debug authentication and user creation
+#auth_verbose = yes
+#auth_debug = yes
+#auth_debug_passwords = yes
+#auth_verbose_passwords = plain
 
 # Authentication for system users.
 passdb {
@@ -89,7 +80,7 @@ plugin {
   quota_rule = *:storage=100M
   quota_max_mail_size=30M
   quota_grace = 0
-  # quota_over_flag_value = TRUE
+  quota_over_flag_value = TRUE
 }
 
 

deploy-chatmail/src/deploy_chatmail/dovecot/expunge.cron

@@ -1,4 +0,0 @@
-2 0 * * * dovecot doveadm expunge -A SEEN BEFORE 40d INBOX
-2 0 * * * dovecot doveadm expunge -A SEEN BEFORE 40d Deltachat
-2 0 * * * dovecot doveadm expunge -A SEEN BEFORE 40d Trash
-2 30 * * * dovecot doveadm purge -A

deploy-chatmail/src/deploy_chatmail/postfix/main.cf.j2

@@ -29,9 +29,6 @@ myhostname = {{ config.domain_name }}
 alias_maps = hash:/etc/aliases
 alias_database = hash:/etc/aliases
 
-# hard limit, also on internal messages
-smtpd_client_message_rate_limit = 80
-
 # Postfix does not deliver mail for any domain by itself.
 # Primary domain is listed in `virtual_mailbox_domains` instead
 # and handed over to Dovecot.
@@ -40,8 +37,6 @@ mydestination =
 relayhost = 
 mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128
 mailbox_size_limit = 0
-# maximum 30MB sized messages
-message_size_limit = 31457280
 recipient_delimiter = +
 inet_interfaces = all
 inet_protocols = all

deploy-chatmail/src/deploy_chatmail/postfix/master.cf

@@ -9,11 +9,7 @@
 # service type  private unpriv  chroot  wakeup  maxproc command + args
 #               (yes)   (yes)   (no)    (never) (100)
 # ==========================================================================
-{% if debug == true %}
-smtp      inet  n       -       y       -       -       smtpd -v
-{% else %}
-smtp      inet  n       -       y       -       -       smtpd 
-{% endif %}
+smtp      inet  n       -       y       -       -       smtpd
 #smtp      inet  n       -       y       -       1       postscreen
 #smtpd     pass  -       -       y       -       -       smtpd
 #dnsblog   unix  -       -       y       -       0       dnsblog
@@ -70,6 +66,8 @@ showq     unix  n       -       y       -       -       showq
 error     unix  -       -       y       -       -       error
 retry     unix  -       -       y       -       -       error
 discard   unix  -       -       y       -       -       discard
+local     unix  -       n       n       -       -       local
+virtual   unix  -       n       n       -       -       virtual
 lmtp      unix  -       -       y       -       -       lmtp
 anvil     unix  -       -       y       -       1       anvil
 scache    unix  -       -       y       -       1       scache

online-tests/benchmark.py

@@ -1,34 +0,0 @@
-def test_tls_serialized_connect(benchmark, imap_or_smtp):
-    def connect():
-        imap_or_smtp.connect()
-
-    benchmark(connect)
-
-
-def test_login(benchmark, imap_or_smtp, gencreds):
-    cls = imap_or_smtp.__class__
-    conns = []
-    for i in range(20):
-        conn = cls(imap_or_smtp.host)
-        conn.connect()
-        conns.append(conn)
-
-    def login():
-        conn = conns.pop()
-        conn.login(*gencreds())
-
-    benchmark(login)
-
-
-def test_send_and_receive_10(benchmark, cmfactory, lp):
-    """send many messages between two accounts"""
-    ac1, ac2 = cmfactory.get_online_accounts(2)
-    chat = cmfactory.get_accepted_chat(ac1, ac2)
-
-    def send_10_receive_all():
-        for i in range(10):
-            chat.send_text(f"hello {i}")
-        for i in range(10):
-            ac2.wait_next_incoming_message()
-
-    benchmark(send_10_receive_all)

online-tests/conftest.py

@@ -1,57 +1,15 @@
 import os
 import io
-import random
-import subprocess
 import imaplib
 import smtplib
 import itertools
 import pytest
-
-
-def pytest_addoption(parser):
-    parser.addoption(
-        "--slow", action="store_true", default=False, help="also run slow tests"
-    )
-
-
-def pytest_runtest_setup(item):
-    markers = list(item.iter_markers(name="slow"))
-    if markers:
-        if not item.config.getoption("--slow"):
-            pytest.skip("skipping slow test, use --slow to run")
+import time
 
 
 @pytest.fixture
 def maildomain():
-    domain = os.environ.get("CHATMAIL_DOMAIN")
-    if not domain:
-        pytest.skip("set CHATMAIL_DOMAIN to a ssh-reachable chatmail instance")
-    return domain
-
-
-@pytest.fixture
-def sshdomain(maildomain):
-    return os.environ.get("CHATMAIL_SSH", maildomain)
-
-
-@pytest.fixture
-def maildomain2():
-    domain = os.environ.get("CHATMAIL_DOMAIN2")
-    if not domain:
-        pytest.skip("set CHATMAIL_DOMAIN2 to a ssh-reachable chatmail instance")
-    return domain
-
-
-@pytest.fixture
-def sshdomain2(maildomain2):
-    return os.environ.get("CHATMAIL_SSH2", maildomain2)
-
-
-def pytest_report_header():
-    domain = os.environ.get("CHATMAIL_DOMAIN")
-    if domain:
-        text = f"chatmail test instance: {domain}"
-        return ["-" * len(text), text, "-" * len(text)]
+    return os.environ.get("CHATMAIL_DOMAIN", "c1.testrun.org")
 
 
 @pytest.fixture
@@ -60,10 +18,6 @@ def imap(maildomain):
 
 
 class ImapConn:
-    AuthError = imaplib.IMAP4.error
-    logcmd = "journalctl -f -u dovecot"
-    name = "dovecot"
-
     def __init__(self, host):
         self.host = host
 
@@ -82,10 +36,6 @@ def smtp(maildomain):
 
 
 class SmtpConn:
-    AuthError = smtplib.SMTPAuthenticationError
-    logcmd = "journalctl -f -t postfix/smtpd -t postfix/smtp -t postfix/lmtp"
-    name = "postfix"
-
     def __init__(self, host):
         self.host = host
 
@@ -98,27 +48,17 @@ class SmtpConn:
         self.conn.login(user, password)
 
 
-@pytest.fixture(params=["imap", "smtp"])
-def imap_or_smtp(request):
-    return request.getfixturevalue(request.param)
-
-
 @pytest.fixture
 def gencreds(maildomain):
+    prefix = str(time.time())
     count = itertools.count()
-    next(count)
 
-    def gen(domain=None):
-        domain = domain if domain else maildomain
+    def gen():
         while 1:
             num = next(count)
-            alphanumeric = "abcdefghijklmnopqrstuvwxyz1234567890"
-            user = "".join(random.choices(alphanumeric, k=10))
-            user = f"ac{num}_{user}"
-            password = "".join(random.choices(alphanumeric, k=10))
-            yield f"{user}@{domain}", f"{password}"
+            yield f"user{prefix}_{num}@{maildomain}", f"password{prefix}_{num}"
 
-    return lambda domain=None: next(gen(domain))
+    return lambda: next(gen())
 
 
 #
@@ -133,20 +73,13 @@ class ChatmailTestProcess:
     def __init__(self, pytestconfig, maildomain, gencreds):
         self.pytestconfig = pytestconfig
         self.maildomain = maildomain
-        assert "." in self.maildomain, maildomain
         self.gencreds = gencreds
         self._addr2files = {}
 
     def get_liveconfig_producer(self):
         while 1:
-            user, password = self.gencreds(self.maildomain)
-            config = {
-                "addr": user,
-                "mail_pw": password,
-            }
-            # speed up account configuration
-            config["mail_server"] = self.maildomain
-            config["send_server"] = self.maildomain
+            user, password = self.gencreds()
+            config = {"addr": user, "mail_pw": password}
             yield config
 
     def cache_maybe_retrieve_configured_db_files(self, cache_addr, db_target_path):
@@ -157,45 +90,17 @@ class ChatmailTestProcess:
 
 
 @pytest.fixture
-def cmfactory(request, gencreds, tmpdir, data, maildomain):
+def cmfactory(request, maildomain, gencreds, tmpdir, data):
     # cloned from deltachat.testplugin.amfactory
     pytest.importorskip("deltachat")
     from deltachat.testplugin import ACFactory
 
     testproc = ChatmailTestProcess(request.config, maildomain, gencreds)
     am = ACFactory(request=request, tmpdir=tmpdir, testprocess=testproc, data=data)
-
-    # nb. a bit hacky
-    # would probably be better if deltachat's test machinery grows native support
-    def switch_maildomain(maildomain2):
-        am.testprocess.maildomain = maildomain2
-
-    am.switch_maildomain = switch_maildomain
-
     yield am
     if hasattr(request.node, "rep_call") and request.node.rep_call.failed:
-        if testproc.pytestconfig.getoption("--extra-info"):
+        if testprocess.pytestconfig.getoption("--extra-info"):
             logfile = io.StringIO()
             am.dump_imap_summary(logfile=logfile)
             print(logfile.getvalue())
             # request.node.add_report_section("call", "imap-server-state", s)
-
-
-@pytest.fixture
-def remote(sshdomain):
-    return Remote(sshdomain)
-
-
-class Remote:
-    def __init__(self, sshdomain):
-        self.sshdomain = sshdomain
-
-    def iter_output(self, logcmd=""):
-        getjournal = f"journalctl -f" if not logcmd else logcmd
-        self.popen = subprocess.Popen(
-            ["ssh", f"root@{self.sshdomain}", getjournal],
-            stdout=subprocess.PIPE,
-        )
-        while 1:
-            line = self.popen.stdout.readline()
-            yield line.decode().strip().lower()

online-tests/pytest.ini

@@ -1,3 +1,2 @@
 [pytest]
-addopts = -vrsx --strict-markers
-markers = slow: mark test as slow (requires --slow option to run)
+addopts = -vrsx

online-tests/test_0_basic.py

@@ -1,15 +0,0 @@
-def test_remote(remote, imap_or_smtp):
-    lineproducer = remote.iter_output(imap_or_smtp.logcmd)
-    imap_or_smtp.connect()
-    assert imap_or_smtp.name in next(lineproducer)
-
-
-def test_use_two_chatmailservers(cmfactory, maildomain2):
-    ac1 = cmfactory.new_online_configuring_account(cache=False)
-    cmfactory.switch_maildomain(maildomain2)
-    ac2 = cmfactory.new_online_configuring_account(cache=False)
-    cmfactory.bring_accounts_online()
-    cmfactory.get_accepted_chat(ac1, ac2)
-    domain1 = ac1.get_config("addr").split("@")[1]
-    domain2 = ac2.get_config("addr").split("@")[1]
-    assert domain1 != domain2

online-tests/test_0_login.py

@@ -1,212 +1,55 @@
 import pytest
+import imaplib
 import smtplib
 
 
-def test_login_basic_functioning(imap_or_smtp, gencreds, lp):
-    """Test a) that an initial login creates a user automatically
-    and b) verify we can also login a second time with the same password
-    and c) that using a different password fails the login."""
-    user, password = gencreds()
-    lp.sec(f"login first time with {user} {password}")
-    imap_or_smtp.connect()
-    imap_or_smtp.login(user, password)
-    lp.indent("success")
+class TestDovecot:
+    def test_login_ok(self, imap, gencreds):
+        user, password = gencreds()
+        imap.connect()
+        imap.login(user, password)
+        # verify it works on another connection
+        imap.connect()
+        imap.login(user, password)
 
-    lp.sec(f"reconnect and login second time {user} {password}")
-    imap_or_smtp.connect()
-    imap_or_smtp.login(user, password)
-    imap_or_smtp.connect()
-    lp.sec("success")
+    def test_login_same_password(self, imap, gencreds):
+        """Test two different users logging in with the same password.
 
-    lp.sec(f"reconnect and verify wrong password fails {user} ")
-    imap_or_smtp.connect()
-    with pytest.raises(imap_or_smtp.AuthError):
-        imap_or_smtp.login(user, password + "wrong")
+        This ensures that authentication process does not confuse the users
+        by using only the password hash as a key.
+        """
+        user1, password1 = gencreds()
+        user2, _password2 = gencreds()
+        imap.connect()
+        imap.login(user1, password1)
+        imap.connect()
+        imap.login(user2, password1)
+
+    def test_login_fail(self, imap, gencreds):
+        user, password = gencreds()
+        imap.connect()
+        imap.login(user, password)
+        imap.connect()
+        with pytest.raises(imaplib.IMAP4.error) as excinfo:
+            imap.login(user, password + "wrong")
+        assert "AUTHENTICATIONFAILED" in str(excinfo)
 
 
-def test_login_same_password(imap_or_smtp, gencreds):
-    """Test two different users logging in with the same password
-    to ensure that authentication process does not confuse the users
-    by using only the password hash as a key.
-    """
-    user1, password1 = gencreds()
-    user2, _ = gencreds()
-    imap_or_smtp.connect()
-    imap_or_smtp.login(user1, password1)
-    imap_or_smtp.connect()
-    imap_or_smtp.login(user2, password1)
+class TestPostfix:
+    def test_login_ok(self, smtp, gencreds):
+        user, password = gencreds()
+        smtp.connect()
+        smtp.login(user, password)
+        # verify it works on another connection
+        smtp.connect()
+        smtp.login(user, password)
 
-
-@pytest.mark.xfail(reason="Only rate limit is internal as well now")
-def test_no_internal_rate_limit(smtp, gencreds):
-    """Test that there is no rate limit between accounts on the same chatmail server."""
-    user, password = gencreds()
-    to_addr, = gencreds()
-    smtp.connect()
-    smtp.login(user, password)
-
-    mail = "\r\n".join(
-        [
-            "Subject: ...",
-            f"From: <{user}>",
-            f"To: <{to_addr}>",
-            "Date: Sun, 15 Oct 2023 16:43:21 +0000",
-            "Message-ID: <Mr.UVyJWZmkCKM.hGzNc6glBE_@c2.testrun.org>",
-            "In-Reply-To: <Mr.MvmCz-GQbi_.6FGRkhDf05c@c2.testrun.org>",
-            "References: <Mr.3gckbNy5bch.uK3Hd2Ws6-w@c2.testrun.org>",
-            "\t<Mr.MvmCz-GQbi_.6FGRkhDf05c@c2.testrun.org>",
-            "Chat-Version: 1.0",
-            f"Autocrypt: addr={user}; prefer-encrypt=mutual;",
-            "\tkeydata=xjMEZSwWjhYJKwYBBAHaRw8BAQdAQBEhqeJh0GueHB6kF/DUQqYCxARNBVokg/AzT+7LqH",
-            "\trNFzxiYXJiYXpAYzIudGVzdHJ1bi5vcmc+wosEEBYIADMCGQEFAmUsFo4CGwMECwkIBwYVCAkKCwID",
-            "\tFgIBFiEEFTfUNvVnY3b9F7yHnmme1PfUhX8ACgkQnmme1PfUhX9A4AEAnHWHp49eBCMHK5t66gYPiW",
-            "\tXQuB1mwUjzGfYWB+0RXUoA/0xcQ3FbUNlGKW7Blp6eMFfViv6Mv2d3kNSXACB6nmcMzjgEZSwWjhIK",
-            "\tKwYBBAGXVQEFAQEHQBpY5L2M1XHo0uxf8SX1wNLBp/OVvidoWHQF2Jz+kJsUAwEIB8J4BBgWCAAgBQ",
-            "\tJlLBaOAhsMFiEEFTfUNvVnY3b9F7yHnmme1PfUhX8ACgkQnmme1PfUhX/INgEA37AJaNvruYsJVanP",
-            "\tIXnYw4CKd55UAwl8Zcy+M2diAbkA/0fHHcGV4r78hpbbL1Os52DPOdqYQRauIeJUeG+G6bQO",
-            "MIME-Version: 1.0",
-            'Content-Type: multipart/encrypted; protocol="application/pgp-encrypted";',
-            '\tboundary="YFrteb74qSXmggbOxZL9dRnhymywAi"',
-            "",
-            "",
-            "--YFrteb74qSXmggbOxZL9dRnhymywAi",
-            "Content-Description: PGP/MIME version identification",
-            "Content-Type: application/pgp-encrypted",
-            "",
-            "Version: 1",
-            "",
-            "",
-            "--YFrteb74qSXmggbOxZL9dRnhymywAi",
-            "Content-Description: OpenPGP encrypted message",
-            'Content-Disposition: inline; filename="encrypted.asc";',
-            'Content-Type: application/octet-stream; name="encrypted.asc"',
-            "",
-            "-----BEGIN PGP MESSAGE-----",
-            "",
-            "wU4DhW3gBZ/VvCYSAQdA8bMs2spwbKdGjVsL1ByPkNrqD7frpB73maeL6I6SzDYg",
-            "O5G53tv339RdKq3WRcCtEEvxjHlUx2XNwXzC04BpmfvBTgNfPUyLDzjXnxIBB0Ae",
-            "8ymwGvXMCCimHXN0Dg8Ui62KOi03h0UgheoHWovJSCDF4CKre/xtFr3nL7lq/PKI",
-            "JsjVNz7/RK9FSXF6WwfONtLCyQGEuVAsB/KXfCBEyfKhaMwGHvhujRidGW5uV1no",
-            "lMGl3ODmo29Lgeu2uSE7EpJRZoe6hU6ddmBkqxax61ZtkaFlGFFpdo2K8balNNdz",
-            "ZsJ/9mmI9x3oOJ4/l1nhQbUO9ADbs7gJhFdV5Qkp30b5fCI7bU+aoe1ccBbLe/WM",
-            "YUty1PqcuQT7XjA+XmYuL261tvW8pBetT+i33/E2d8PzzYt2IuK9qeevyS+yxdwA",
-            "kfwejFWzzsUlJaDxs1x4XOxkMgSj+jo+g12dFOb7fyClsAnq23iDb8AuaT/BScAI",
-            "+lO+gher69+6LmM7VGHLG5k762J1jTaQCaKt1s8TAWV99Eo4491vL6fyvk3l/Cfg",
-            "RXSwiWFgj19Pn0Rq7CD9v22UE2vdUMBTcV4aw79mClk1YQ23jbF0y5DCjPdJ62Zo",
-            "tskBgFt3NoWV80jZ76zIBLrrjLwCCll8JjJtFwSkt2GX5RFBsVa4A8IDht9RtEk7",
-            "rrHgbSZQfkauEi/mH3/6CDZoLqSHudUZ7d4MaJwun1TkFYGe2ORwGJd4OBj3oGJp",
-            "H8YBwCpk///L/fKjX0Gg3M8nrpM4wrRFhPKidAgO/kcm25X4+ZHlVkWBTCt5RWKI",
-            "fHh6oLDZCqCfcgMkE1KKmwfIHaUkhq5BPRigwy6i5dh1DM4+1UCLh3dxzVbqE9b9",
-            "61NB19nXdRtDA2sOUnj9ve6m/wEPyCb6/zBQZqvCBYb1/AjdXpUrFT+DbpfyxaXN",
-            "XfhDVb5mNqNM/IVj0V5fvTc6vOfYbzQtPm10H+FdWWfb+rJRfyC3MA2w2IqstFe3",
-            "w3bu2iE6CQvSqRvge+ZqLKt/NqYwOURiUmpuklbl3kPJ97+mfKWoiqk8Iz1VY+bb",
-            "NMUC7aoGv+jcoj+WS6PYO8N6BeRVUUB3ZJSf8nzjgxm1/BcM+UD3BPrlhT11ODRs",
-            "baifGbprMWwt3dhb8cQgRT8GPdpO1OsDkzL6iikMjLHWWiA99GV6ruiHsIPw6boW",
-            "A6/uSOskbDHOROotKmddGTBd0iiHXAoQsJFt1ZjUkt6EHrgWs+GAvrvKpXs1mrz8",
-            "uj3GwEFrHS+Xuf2UDgpszYT3hI2cL/kUtGakVR7m7vVMZqXBUbZdGAEb1PZNPwsI",
-            "E4aMK02+EVB+tSN4Fzj99N2YD0inVYt+oPjr2tHhUS6aSGBNS/48Ki47DOg4Sxkn",
-            "lkOWnEbCD+XTnbDd",
-            "=agR5",
-            "-----END PGP MESSAGE-----",
-            "",
-            "",
-            "--YFrteb74qSXmggbOxZL9dRnhymywAi--",
-            "",
-            "",
-        ]
-    ).encode()
-    for i in range(100):
-        print("Sending mail", str(i))
-        smtp.conn.sendmail(user, to_addr, mail)
-
-
-def test_exceed_rate_limit(smtp, gencreds):
-    """Test that the outbound rate limit is exceeded if we send a lot of messages at once."""
-    user, password = gencreds()
-    smtp.connect()
-    smtp.login(user, password)
-
-    to_addr = "foobar@example.org"
-    mail = "\r\n".join(
-        [
-            "Subject: ...",
-            f"From: <{user}>",
-            f"To: <{to_addr}>",
-            "Date: Sun, 15 Oct 2023 16:43:21 +0000",
-            "Message-ID: <Mr.UVyJWZmkCKM.hGzNc6glBE_@c2.testrun.org>",
-            "In-Reply-To: <Mr.MvmCz-GQbi_.6FGRkhDf05c@c2.testrun.org>",
-            "References: <Mr.3gckbNy5bch.uK3Hd2Ws6-w@c2.testrun.org>",
-            "\t<Mr.MvmCz-GQbi_.6FGRkhDf05c@c2.testrun.org>",
-            "Chat-Version: 1.0",
-            f"Autocrypt: addr={user}; prefer-encrypt=mutual;",
-            "\tkeydata=xjMEZSwWjhYJKwYBBAHaRw8BAQdAQBEhqeJh0GueHB6kF/DUQqYCxARNBVokg/AzT+7LqH",
-            "\trNFzxiYXJiYXpAYzIudGVzdHJ1bi5vcmc+wosEEBYIADMCGQEFAmUsFo4CGwMECwkIBwYVCAkKCwID",
-            "\tFgIBFiEEFTfUNvVnY3b9F7yHnmme1PfUhX8ACgkQnmme1PfUhX9A4AEAnHWHp49eBCMHK5t66gYPiW",
-            "\tXQuB1mwUjzGfYWB+0RXUoA/0xcQ3FbUNlGKW7Blp6eMFfViv6Mv2d3kNSXACB6nmcMzjgEZSwWjhIK",
-            "\tKwYBBAGXVQEFAQEHQBpY5L2M1XHo0uxf8SX1wNLBp/OVvidoWHQF2Jz+kJsUAwEIB8J4BBgWCAAgBQ",
-            "\tJlLBaOAhsMFiEEFTfUNvVnY3b9F7yHnmme1PfUhX8ACgkQnmme1PfUhX/INgEA37AJaNvruYsJVanP",
-            "\tIXnYw4CKd55UAwl8Zcy+M2diAbkA/0fHHcGV4r78hpbbL1Os52DPOdqYQRauIeJUeG+G6bQO",
-            "MIME-Version: 1.0",
-            'Content-Type: multipart/encrypted; protocol="application/pgp-encrypted";',
-            '\tboundary="YFrteb74qSXmggbOxZL9dRnhymywAi"',
-            "",
-            "",
-            "--YFrteb74qSXmggbOxZL9dRnhymywAi",
-            "Content-Description: PGP/MIME version identification",
-            "Content-Type: application/pgp-encrypted",
-            "",
-            "Version: 1",
-            "",
-            "",
-            "--YFrteb74qSXmggbOxZL9dRnhymywAi",
-            "Content-Description: OpenPGP encrypted message",
-            'Content-Disposition: inline; filename="encrypted.asc";',
-            'Content-Type: application/octet-stream; name="encrypted.asc"',
-            "",
-            "-----BEGIN PGP MESSAGE-----",
-            "",
-            "wU4DhW3gBZ/VvCYSAQdA8bMs2spwbKdGjVsL1ByPkNrqD7frpB73maeL6I6SzDYg",
-            "O5G53tv339RdKq3WRcCtEEvxjHlUx2XNwXzC04BpmfvBTgNfPUyLDzjXnxIBB0Ae",
-            "8ymwGvXMCCimHXN0Dg8Ui62KOi03h0UgheoHWovJSCDF4CKre/xtFr3nL7lq/PKI",
-            "JsjVNz7/RK9FSXF6WwfONtLCyQGEuVAsB/KXfCBEyfKhaMwGHvhujRidGW5uV1no",
-            "lMGl3ODmo29Lgeu2uSE7EpJRZoe6hU6ddmBkqxax61ZtkaFlGFFpdo2K8balNNdz",
-            "ZsJ/9mmI9x3oOJ4/l1nhQbUO9ADbs7gJhFdV5Qkp30b5fCI7bU+aoe1ccBbLe/WM",
-            "YUty1PqcuQT7XjA+XmYuL261tvW8pBetT+i33/E2d8PzzYt2IuK9qeevyS+yxdwA",
-            "kfwejFWzzsUlJaDxs1x4XOxkMgSj+jo+g12dFOb7fyClsAnq23iDb8AuaT/BScAI",
-            "+lO+gher69+6LmM7VGHLG5k762J1jTaQCaKt1s8TAWV99Eo4491vL6fyvk3l/Cfg",
-            "RXSwiWFgj19Pn0Rq7CD9v22UE2vdUMBTcV4aw79mClk1YQ23jbF0y5DCjPdJ62Zo",
-            "tskBgFt3NoWV80jZ76zIBLrrjLwCCll8JjJtFwSkt2GX5RFBsVa4A8IDht9RtEk7",
-            "rrHgbSZQfkauEi/mH3/6CDZoLqSHudUZ7d4MaJwun1TkFYGe2ORwGJd4OBj3oGJp",
-            "H8YBwCpk///L/fKjX0Gg3M8nrpM4wrRFhPKidAgO/kcm25X4+ZHlVkWBTCt5RWKI",
-            "fHh6oLDZCqCfcgMkE1KKmwfIHaUkhq5BPRigwy6i5dh1DM4+1UCLh3dxzVbqE9b9",
-            "61NB19nXdRtDA2sOUnj9ve6m/wEPyCb6/zBQZqvCBYb1/AjdXpUrFT+DbpfyxaXN",
-            "XfhDVb5mNqNM/IVj0V5fvTc6vOfYbzQtPm10H+FdWWfb+rJRfyC3MA2w2IqstFe3",
-            "w3bu2iE6CQvSqRvge+ZqLKt/NqYwOURiUmpuklbl3kPJ97+mfKWoiqk8Iz1VY+bb",
-            "NMUC7aoGv+jcoj+WS6PYO8N6BeRVUUB3ZJSf8nzjgxm1/BcM+UD3BPrlhT11ODRs",
-            "baifGbprMWwt3dhb8cQgRT8GPdpO1OsDkzL6iikMjLHWWiA99GV6ruiHsIPw6boW",
-            "A6/uSOskbDHOROotKmddGTBd0iiHXAoQsJFt1ZjUkt6EHrgWs+GAvrvKpXs1mrz8",
-            "uj3GwEFrHS+Xuf2UDgpszYT3hI2cL/kUtGakVR7m7vVMZqXBUbZdGAEb1PZNPwsI",
-            "E4aMK02+EVB+tSN4Fzj99N2YD0inVYt+oPjr2tHhUS6aSGBNS/48Ki47DOg4Sxkn",
-            "lkOWnEbCD+XTnbDd",
-            "=agR5",
-            "-----END PGP MESSAGE-----",
-            "",
-            "",
-            "--YFrteb74qSXmggbOxZL9dRnhymywAi--",
-            "",
-            "",
-        ]
-    ).encode()
-    for i in range(100):
-        print("Sending mail", str(i))
-        try:
-            smtp.conn.sendmail(user, to_addr, mail)
-        except smtplib.SMTPSenderRefused as e:
-            if i == 0:
-                pytest.fail(f"rate limit was exceeded too early with msg {i} - maybe wait a minute before testing?")
-            if i < 41:
-                pytest.fail(f"rate limit was exceeded too early with msg {i}")
-            assert e.smtp_code == 450
-            assert b'4.7.1 Error: too much mail from' in e.smtp_error
-            return
-    pytest.fail("Rate limit was not exceeded")
+    def test_login_fail(self, smtp, gencreds):
+        user, password = gencreds()
+        smtp.connect()
+        smtp.login(user, password)
+        smtp.connect()
+        with pytest.raises(smtplib.SMTPAuthenticationError) as excinfo:
+            smtp.login(user, password + "wrong")
+        assert excinfo.value.smtp_code == 535
+        assert "authentication failed" in str(excinfo)

online-tests/test_1_deltachat.py

@@ -1,83 +1,45 @@
+import os.path
 import random
-import pytest
+import time
 
 
-class TestEndToEndDeltaChat:
-    "Tests that use Delta Chat accounts on the chat mail instance."
-
+class TestMailSending:
     def test_one_on_one(self, cmfactory, lp):
-        """Test that a DC account can send a message to a second DC account
-        on the same chat-mail instance."""
         ac1, ac2 = cmfactory.get_online_accounts(2)
         chat = cmfactory.get_accepted_chat(ac1, ac2)
 
         lp.sec("ac1: prepare and send text message to ac2")
-        chat.send_text("message0")
+        msg1 = chat.send_text("message0")
 
         lp.sec("wait for ac2 to receive message")
         msg2 = ac2._evtracker.wait_next_incoming_message()
         assert msg2.text == "message0"
 
-    @pytest.mark.slow
-    def test_exceed_quota(self, cmfactory, lp, tmpdir, remote):
-        """This is a very slow test as it needs to upload >100MB of mail data
-        before quota is exceeded, and thus depends on the speed of the upload.
-        """
+    def test_exceed_quota(self, cmfactory, lp, tmpdir):
         ac1, ac2 = cmfactory.get_online_accounts(2)
         chat = cmfactory.get_accepted_chat(ac1, ac2)
 
-        quota = 1024 * 1024 * 100
-        attachsize = 1 * 1024 * 1024
-        num_to_send = quota // attachsize + 2
-        lp.sec(f"ac1: send {num_to_send} large files to ac2")
-        lp.indent(f"per-user quota is assumed to be: {quota/(1024*1024)}MB")
+        ac2.set_config("download_limit", 1024 * 2)  # set download_limit to 2 KB avoid downloading all those 5MB files
+
+        lp.sec("ac1: send 25 5 MB files to ac2")
         alphanumeric = "abcdefghijklmnopqrstuvwxyz1234567890"
-        msgs = []
-        for i in range(num_to_send):
+        for i in range(25):
             attachment = tmpdir / f"attachment{i}"
-            data = "".join(random.choice(alphanumeric) for i in range(1024))
             with open(attachment, "w+") as f:
-                for j in range(attachsize // len(data)):
-                    f.write(data)
+                for j in range(1024 * 1024 * 5):
+                    f.write(random.choice(alphanumeric))
 
-            msg = chat.send_file(str(attachment))
-            msgs.append(msg)
-            lp.indent(f"Sent out msg {i}, size {attachsize/(1024*1024)}MB")
+            print("Sent out msg", str(i))
+            chat.send_file(str(attachment))
 
-        lp.sec("ac2: check messages are arriving until quota is reached")
-
-        addr = ac2.get_config("addr").lower()
-        saved_ok = 0
-        for line in remote.iter_output("journalctl -f -u dovecot"):
-            if addr not in line:
-                # print(line)
-                continue
-            if "quota" in line:
-                if "quota exceeded" in line:
-                    if saved_ok < num_to_send // 2:
-                        pytest.fail(
-                            f"quota exceeded too early: after {saved_ok} messages already"
-                        )
-                    lp.indent("good, message sending failed because quota was exceeded")
-                    return
-            if "saved mail to inbox" in line:
-                saved_ok += 1
-                print(f"{saved_ok}: {line}")
-                if saved_ok >= num_to_send:
-                    break
-
-        pytest.fail("sending succeeded although messages should exceed quota")
-
-    def test_securejoin(self, cmfactory, lp, maildomain2):
-        ac1 = cmfactory.new_online_configuring_account(cache=False)
-        cmfactory.switch_maildomain(maildomain2)
-        ac2 = cmfactory.new_online_configuring_account(cache=False)
-        cmfactory.bring_accounts_online()
-
-        lp.sec("ac1: create QR code and let ac2 scan it, starting the securejoin")
-        qr = ac1.get_setup_contact_qr()
-
-        lp.sec("ac2: start QR-code based setup contact protocol")
-        ch = ac2.qr_setup_contact(qr)
-        assert ch.id >= 10
-        ac1._evtracker.wait_securejoin_inviter_progress(1000)
+        ac2.wait_next_incoming_message()
+        lp.sec("ac2: check that at least one message failed")
+        failed = False
+        for i in range(25):
+            if chat.get_messages()[i].is_out_failed():
+                failed = True
+                print(chat.get_messages()[i].get_message_info())
+        try:
+            assert failed
+        except:
+            import pdb; pdb.set_trace()

plan.txt

@@ -3,11 +3,17 @@
 ## Dovecot goals/steps
 
 - automatic expiry of messages older than M days
-   - also expunge unread messages
+   - delete unconditionally messages older than 40 days
 
 - limit: configure max-connections per account
 
 
+## Filtermail
+
+- (alex, Only allow (outgoing) mails if secure-join or autocrypt-pgp-encrypted format.
+  TODO: mime-parse mails and check/add tests
+
+
 ## nami: send out rate limit / rspamd
 
 - basic outgoing send rate/limits (depending on "account-rating")

scripts/bench.sh

@@ -1,4 +0,0 @@
-#!/bin/bash
-set -e
-
-online-tests/venv/bin/pytest online-tests/benchmark.py -vrx 

scripts/deploy.sh

@@ -2,9 +2,8 @@
 : ${CHATMAIL_DOMAIN:=c1.testrun.org}
 export CHATMAIL_DOMAIN
 
-chatmaild/venv/bin/python3 -m build -n --sdist chatmaild --outdir dist
+venv/bin/python3 -m build -n --sdist chatmaild --outdir dist
 
-deploy-chatmail/venv/bin/pyinfra --ssh-user root "$CHATMAIL_DOMAIN" \
-    deploy-chatmail/src/deploy_chatmail/deploy.py
+deploy-chatmail/venv/bin/pyinfra --ssh-user root "$CHATMAIL_DOMAIN" deploy.py
 
 rm -r dist/

scripts/init.sh

@@ -6,9 +6,12 @@ deploy-chatmail/venv/bin/pip install -e deploy-chatmail
 deploy-chatmail/venv/bin/pip install -e chatmaild
 
 python3 -m venv chatmaild/venv
-sudo apt install -y dovecot-core && sudo systemctl disable --now dovecot
-chatmaild/venv/bin/pip install --upgrade pytest build 'setuptools>=68'
+chatmaild/venv/bin/pip install pytest
 chatmaild/venv/bin/pip install -e chatmaild
 
 python3 -m venv online-tests/venv
-online-tests/venv/bin/pip install pytest pytest-timeout pdbpp deltachat pytest-benchmark
+online-tests/venv/bin/pip install pytest pytest-timeout pdbpp deltachat
+
+python3 -m venv venv
+venv/bin/pip install build
+venv/bin/pip install 'setuptools>=68'

scripts/remote-deploy.sh

@@ -2,7 +2,7 @@
 set -e
 
 : ${CHATMAIL_DOMAIN:=c1.testrun.org}
-: ${CHATMAIL_SSH:=$CHATMAIL_DOMAIN}
+: ${CHATMAIL_SSH_HOST:=$CHATMAIL_DOMAIN}
 
-rsync -avz . "root@$CHATMAIL_SSH:/root/chatmail" --exclude='/.git' --filter="dir-merge,- .gitignore"
-ssh "root@$CHATMAIL_SSH" "cd /root/chatmail; apt install -y python3-venv; python3 -m venv venv; venv/bin/pip install pyinfra build; venv/bin/python3 -m build -n --sdist chatmaild --outdir dist; venv/bin/pip install -e ./deploy-chatmail -e ./chatmaild; export CHATMAIL_DOMAIN=$CHATMAIL_DOMAIN; venv/bin/pyinfra @local deploy.py"
+rsync -avz . "root@$CHATMAIL_SSH_HOST:/root/chatmail" --exclude='/.git' --filter="dir-merge,- .gitignore"
+ssh "root@$CHATMAIL_SSH_HOST" "cd /root/chatmail; apt install -y python3-venv; python3 -m venv venv; venv/bin/pip install pyinfra build; venv/bin/python3 -m build -n --sdist chatmaild --outdir dist; venv/bin/pip install -e ./deploy-chatmail -e ./chatmaild; export CHATMAIL_DOMAIN=$CHATMAIL_DOMAIN; venv/bin/pyinfra @local deploy.py"

scripts/test.sh

@@ -1,3 +1,7 @@
 #!/bin/bash
-chatmaild/venv/bin/pytest chatmaild/ $@
-online-tests/venv/bin/pytest online-tests/ -vrx --durations=5 $@
+set -e
+pushd chatmaild/src/chatmaild
+../../venv/bin/pytest
+popd
+
+online-tests/venv/bin/pytest online-tests/ -vrx --durations=5