filtermail: only remove one linebreak

See
<https://docs.python.org/3/library/asyncio-eventloop.html#executing-code-in-thread-or-process-pools>
for the documentation.

This should avoid processing of large messages from hogging asyncio
thread and delaying async operations like accepting new connections.

.github/workflows/test-and-deploy-ipv4only.yaml

@@ -77,7 +77,7 @@ jobs:
           cmdeploy init staging-ipv4.testrun.org
           sed -i 's#disable_ipv6 = False#disable_ipv6 = True#' chatmail.ini
 
-      - run: cmdeploy run
+      - run: cmdeploy run --verbose --skip-dns-check
 
       - name: set DNS entries
         run: |

.github/workflows/test-and-deploy.yaml

@@ -75,7 +75,7 @@ jobs:
 
       - run: cmdeploy init staging2.testrun.org
 
-      - run: cmdeploy run --verbose
+      - run: cmdeploy run --verbose --skip-dns-check
 
       - name: set DNS entries
         run: |

CHANGELOG.md

@@ -2,24 +2,54 @@
 
 ## untagged
 
+- filtermail: run CPU-intensive handle_DATA in a thread pool executor
+  ([#676](https://github.com/chatmail/relay/pull/676))
+
+- don't use the complicated logging module in filtermail to exclude a potential source of errors. 
+  ([#674](https://github.com/chatmail/relay/pull/674))
+
+- Specify nginx.conf to only handle `mail_domain`, www, and mta-sts domains
+  ([#636](https://github.com/chatmail/relay/pull/636))
+
+- Setup TURN server
+  ([#621](https://github.com/chatmail/relay/pull/621))
+
 - cmdeploy: make --ssh-host work with localhost
   ([#659](https://github.com/chatmail/relay/pull/659))
 
 - Update iroh-relay to 0.35.0
   ([#650](https://github.com/chatmail/relay/pull/650))
 
+- filtermail: accept mails from Protonmail
+  ([#616](https://github.com/chatmail/relay/pull/655))
+
 - Ignore all RCPT TO: parameters
   ([#651](https://github.com/chatmail/relay/pull/651))
 
+- Increase opendkim DNS Timeout from 5 to 60 seconds
+  ([#672](https://github.com/chatmail/relay/pull/672))
+
+- Add config parameter for Let's Encrypt ACME email
+  ([#663](https://github.com/chatmail/relay/pull/663))
+
 - Use max username length in newemail.py, not min
   ([#648](https://github.com/chatmail/relay/pull/648))
 
+- Add startup for `fcgiwrap.service` because sometimes it did not start automatically.
+  ([#657](https://github.com/chatmail/relay/pull/657))
+
+- Add `cmdeploy init --force` command for recreating chatmail.ini
+  ([#656](https://github.com/chatmail/relay/pull/656))
+
 - Increase maxproc for reinjecting ports from 10 to 100
   ([#646](https://github.com/chatmail/relay/pull/646))
 
 - Allow ports 143 and 993 to be used by `dovecot` process
   ([#639](https://github.com/chatmail/relay/pull/639))
 
+- Add `--skip-dns-check` argument to `cmdeploy run` command, which disables DNS record checking before installation.
+  ([#661](https://github.com/chatmail/relay/pull/661))
+
 ## 1.7.0 2025-09-11
 
 - Make www upload path configurable

README.md

@@ -456,15 +456,94 @@ to send messages outside.
 
 To setup a reverse proxy
 (or rather Destination NAT, DNAT)
-for your chatmail relay, run:
+for your chatmail relay,
+put the following configuration in `/etc/nftables.conf`:
+```
+#!/usr/sbin/nft -f
+
+flush ruleset
+
+define wan = eth0
+
+# Which ports to proxy.
+#
+# Note that SSH is not proxied
+# so it is possible to log into the proxy server 
+# and not the original one.
+define ports = { smtp, http, https, imap, imaps, submission, submissions }
+
+# The host we want to proxy to.
+define ipv4_address = AAA.BBB.CCC.DDD
+define ipv6_address = [XXX::1]
+
+table ip nat {
+        chain prerouting {
+                type nat hook prerouting priority dstnat; policy accept;
+                iif $wan tcp dport $ports dnat to $ipv4_address
+        }
+
+        chain postrouting {
+                type nat hook postrouting priority 0;
+
+                oifname $wan masquerade
+        }
+}
+
+table ip6 nat {
+        chain prerouting {
+                type nat hook prerouting priority dstnat; policy accept;
+                iif $wan tcp dport $ports dnat to $ipv6_address
+        }
+
+        chain postrouting {
+                type nat hook postrouting priority 0;
+
+                oifname $wan masquerade
+        }
+}
+
+table inet filter {
+        chain input {
+                type filter hook input priority filter; policy drop;
+
+                # Accept ICMP.
+                # It is especially important to accept ICMPv6 ND messages,
+                # otherwise IPv6 connectivity breaks.
+                icmp type { echo-request } accept
+                icmpv6 type { echo-request, nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept
+
+                # Allow incoming SSH connections.
+                tcp dport { ssh } accept
+
+                ct state established accept
+        }
+        chain forward {
+                type filter hook forward priority filter; policy drop;
+
+                ct state established accept
+                ip daddr $ipv4_address counter accept
+                ip6 daddr $ipv6_address counter accept
+        }
+        chain output {
+                type filter hook output priority filter;
+        }
+}
+```
+
+Run `systemctl enable nftables.service`
+to ensure configuration is reloaded when the proxy relay reboots.
+
+Uncomment in `/etc/sysctl.conf` the following two lines:
 
 ```
-scripts/cmdeploy proxy <proxy_ip_address> --relay-ipv4 <relay_ipv4_address> --relay-ipv6 <relay_ipv6_address>
+net.ipv4.ip_forward=1
+net.ipv6.conf.all.forwarding=1
 ```
 
+Then reboot the relay or do `sysctl -p` and `nft -f /etc/nftables.conf`.
+
 Once proxy relay is set up,
-you can add its IP address to the DNS,
-or distribute it as you wish.
+you can add its IP address to the DNS.
 
 ## Neighbors and Acquaintances
 

chatmaild/pyproject.toml

@@ -29,6 +29,7 @@ echobot = "chatmaild.echo:main"
 chatmail-metrics = "chatmaild.metrics:main"
 delete_inactive_users = "chatmaild.delete_inactive_users:main"
 lastlogin = "chatmaild.lastlogin:main"
+turnserver = "chatmaild.turnserver:main"
 
 [project.entry-points.pytest11]
 "chatmaild.testplugin" = "chatmaild.tests.plugin"

chatmaild/src/chatmaild/config.py

@@ -44,6 +44,7 @@ class Config:
         )
         self.mtail_address = params.get("mtail_address")
         self.disable_ipv6 = params.get("disable_ipv6", "false").lower() == "true"
+        self.acme_email = params.get("acme_email", "")
         self.imap_rawlog = params.get("imap_rawlog", "false").lower() == "true"
         if "iroh_relay" not in params:
             self.iroh_relay = "https://" + params["mail_domain"]

chatmaild/src/chatmaild/filtermail.py

@@ -2,7 +2,6 @@
 import asyncio
 import base64
 import binascii
-import logging
 import sys
 import time
 from email import policy
@@ -83,8 +82,14 @@ def check_openpgp_payload(payload: bytes):
     return False
 
 
-def check_armored_payload(payload: str):
-    prefix = "-----BEGIN PGP MESSAGE-----\r\n\r\n"
+def check_armored_payload(payload: str, outgoing: bool):
+    """Check the armored PGP message for invalid content.
+
+    :param payload: the armored PGP message
+    :param outgoing: whether the message is outgoing or incoming
+    :return: whether the message is a valid PGP message
+    """
+    prefix = "-----BEGIN PGP MESSAGE-----\r\n"
     if not payload.startswith(prefix):
         return False
     payload = payload.removeprefix(prefix)
@@ -96,6 +101,17 @@ def check_armored_payload(payload: str):
         return False
     payload = payload.removesuffix(suffix)
 
+    # Disallow comments in outgoing messages
+    version_comment = "Version: "
+    if payload.startswith(version_comment):
+        splitindex = payload.find("\r\n") + 2
+        payload = payload[splitindex:]
+        if outgoing:
+            return False
+
+    while payload.startswith("\r\n"):
+        payload = payload.removeprefix("\r\n")
+
     # Remove CRC24.
     payload = payload.rpartition("=")[0]
 
@@ -131,7 +147,7 @@ def is_securejoin(message):
     return True
 
 
-def check_encrypted(message):
+def check_encrypted(message, outgoing=True):
     """Check that the message is an OpenPGP-encrypted message.
 
     MIME structure of the message must correspond to <https://www.rfc-editor.org/rfc/rfc3156>.
@@ -158,7 +174,7 @@ def check_encrypted(message):
             if part.get_content_type() != "application/octet-stream":
                 return False
 
-            if not check_armored_payload(part.get_payload()):
+            if not check_armored_payload(part.get_payload(), outgoing=outgoing):
                 return False
         else:
             return False
@@ -212,7 +228,7 @@ class OutgoingBeforeQueueHandler:
         self.send_rate_limiter = SendRateLimiter()
 
     async def handle_MAIL(self, server, session, envelope, address, mail_options):
-        logging.info(f"handle_MAIL from {address}")
+        log_info(f"handle_MAIL from {address}")
         envelope.mail_from = address
         max_sent = self.config.max_user_send_per_minute
         if not self.send_rate_limiter.is_sending_allowed(address, max_sent):
@@ -225,11 +241,15 @@ class OutgoingBeforeQueueHandler:
         return "250 OK"
 
     async def handle_DATA(self, server, session, envelope):
-        logging.info("handle_DATA before-queue")
+        loop = asyncio.get_running_loop()
+        return await loop.run_in_executor(None, self.sync_handle_DATA, envelope)
+
+    def sync_handle_DATA(self, envelope):
+        log_info("handle_DATA before-queue")
         error = self.check_DATA(envelope)
         if error:
             return error
-        logging.info("re-injecting the mail that passed checks")
+        log_info("re-injecting the mail that passed checks")
         client = SMTPClient("localhost", self.config.postfix_reinject_port)
         client.sendmail(
             envelope.mail_from, envelope.rcpt_tos, envelope.original_content
@@ -238,10 +258,10 @@ class OutgoingBeforeQueueHandler:
 
     def check_DATA(self, envelope):
         """the central filtering function for e-mails."""
-        logging.info(f"Processing DATA message from {envelope.mail_from}")
+        log_info(f"Processing DATA message from {envelope.mail_from}")
 
         message = BytesParser(policy=policy.default).parsebytes(envelope.content)
-        mail_encrypted = check_encrypted(message)
+        mail_encrypted = check_encrypted(message, outgoing=True)
 
         _, from_addr = parseaddr(message.get("from").strip())
 
@@ -278,11 +298,15 @@ class IncomingBeforeQueueHandler:
         self.config = config
 
     async def handle_DATA(self, server, session, envelope):
-        logging.info("handle_DATA before-queue")
+        loop = asyncio.get_running_loop()
+        return await loop.run_in_executor(None, self.sync_handle_DATA, envelope)
+
+    def sync_handle_DATA(self, envelope):
+        log_info("handle_DATA before-queue")
         error = self.check_DATA(envelope)
         if error:
             return error
-        logging.info("re-injecting the mail that passed checks")
+        log_info("re-injecting the mail that passed checks")
 
         # the smtp daemon on reinject_port_incoming gives it to dkim milter
         # which looks at source address to determine whether to verify or sign
@@ -298,10 +322,10 @@ class IncomingBeforeQueueHandler:
 
     def check_DATA(self, envelope):
         """the central filtering function for e-mails."""
-        logging.info(f"Processing DATA message from {envelope.mail_from}")
+        log_info(f"Processing DATA message from {envelope.mail_from}")
 
         message = BytesParser(policy=policy.default).parsebytes(envelope.content)
-        mail_encrypted = check_encrypted(message)
+        mail_encrypted = check_encrypted(message, outgoing=False)
 
         if mail_encrypted or is_securejoin(message):
             print("Incoming: Filtering encrypted mail.", file=sys.stderr)
@@ -340,16 +364,19 @@ class SendRateLimiter:
         return False
 
 
+def log_info(msg):
+    print(msg, file=sys.stderr)
+
+
 def main():
     args = sys.argv[1:]
     assert len(args) == 2
     config = read_config(args[0])
     mode = args[1]
-    logging.basicConfig(level=logging.WARN)
     loop = asyncio.new_event_loop()
     asyncio.set_event_loop(loop)
     assert mode in ["incoming", "outgoing"]
     task = asyncmain_beforequeue(config, mode)
     loop.create_task(task)
-    logging.info("entering serving loop")
+    log_info("entering serving loop")
     loop.run_forever()

chatmaild/src/chatmaild/ini/chatmail.ini.f

@@ -45,6 +45,9 @@ passthrough_senders =
 # (space-separated, item may start with "@" to whitelist whole recipient domains)
 passthrough_recipients = xstore@testrun.org echo@{mail_domain}
 
+# path to www directory - documented here: https://github.com/chatmail/relay/#custom-web-pages
+#www_folder = www
+
 #
 # Deployment Details
 #
@@ -60,6 +63,9 @@ postfix_reinject_port_incoming = 10026
 # if set to "True" IPv6 is disabled
 disable_ipv6 = False
 
+# Your email adress, which will be used in acmetool to manage Let's Encrypt SSL certificates
+acme_email = 
+
 # Defaults to https://iroh.{{mail_domain}} and running `iroh-relay` on the chatmail
 # service.
 # If you set it to anything else, the service will be disabled

chatmaild/src/chatmaild/metadata.py

@@ -7,6 +7,7 @@ from .config import read_config
 from .dictproxy import DictProxy
 from .filedict import FileDict
 from .notifier import Notifier
+from .turnserver import turn_credentials
 
 
 def _is_valid_token_timestamp(timestamp, now):
@@ -75,11 +76,12 @@ class Metadata:
 
 
 class MetadataDictProxy(DictProxy):
-    def __init__(self, notifier, metadata, iroh_relay=None):
+    def __init__(self, notifier, metadata, iroh_relay=None, turn_hostname=None):
         super().__init__()
         self.notifier = notifier
         self.metadata = metadata
         self.iroh_relay = iroh_relay
+        self.turn_hostname = turn_hostname
 
     def handle_lookup(self, parts):
         # Lpriv/43f5f508a7ea0366dff30200c15250e3/devicetoken\tlkj123poi@c2.testrun.org
@@ -98,6 +100,11 @@ class MetadataDictProxy(DictProxy):
             ):
                 # Handle `GETMETADATA "" /shared/vendor/deltachat/irohrelay`
                 return f"O{self.iroh_relay}\n"
+            elif keyname == "vendor/vendor.dovecot/pvt/server/vendor/deltachat/turn":
+                res = turn_credentials()
+                port = 3478
+                return f"O{self.turn_hostname}:{port}:{res}\n"
+
         logging.warning(f"lookup ignored: {parts!r}")
         return "N\n"
 
@@ -121,6 +128,7 @@ def main():
 
     config = read_config(config_path)
     iroh_relay = config.iroh_relay
+    mail_domain = config.mail_domain
 
     vmail_dir = config.mailboxes_dir
     if not vmail_dir.exists():
@@ -134,7 +142,10 @@ def main():
     notifier.start_notification_threads(metadata.remove_token_from_addr)
 
     dictproxy = MetadataDictProxy(
-        notifier=notifier, metadata=metadata, iroh_relay=iroh_relay
+        notifier=notifier,
+        metadata=metadata,
+        iroh_relay=iroh_relay,
+        turn_hostname=mail_domain,
     )
 
     dictproxy.serve_forever_from_socket(socket)

chatmaild/src/chatmaild/tests/test_filtermail.py

@@ -241,8 +241,9 @@ def test_cleartext_passthrough_senders(gencreds, handler, maildata):
 
 
 def test_check_armored_payload():
-    payload = """-----BEGIN PGP MESSAGE-----\r
-\r
+    prefix = "-----BEGIN PGP MESSAGE-----\r\n"
+    comment = "Version: ProtonMail\r\n"
+    payload = """\r
 wU4DSqFx0d1yqAoSAQdAYkX/ZN/Az4B0k7X47zKyWrXxlDEdS3WOy0Yf2+GJTFgg\r
 Zk5ql0mLG8Ze+ZifCS0XMO4otlemSyJ0K1ZPdFMGzUDBTgNqzkFabxXoXRIBB0AM\r
 755wlX41X6Ay3KhnwBq7yEqSykVH6F3x11iHPKraLCAGZoaS8bKKNy/zg5slda1X\r
@@ -278,16 +279,25 @@ UN4fiB0KR9JyG2ayUdNJVkXZSZLnHyRgiaadlpUo16LVvw==\r
 \r
 """
 
-    assert check_armored_payload(payload) == True
+    commented_payload = prefix + comment + payload
+    assert check_armored_payload(commented_payload, outgoing=False) == True
+    assert check_armored_payload(commented_payload, outgoing=True) == False
+
+    payload = prefix + payload
+    assert check_armored_payload(payload, outgoing=False) == True
+    assert check_armored_payload(payload, outgoing=True) == True
 
     payload = payload.removesuffix("\r\n")
-    assert check_armored_payload(payload) == True
+    assert check_armored_payload(payload, outgoing=False) == True
+    assert check_armored_payload(payload, outgoing=True) == True
 
     payload = payload.removesuffix("\r\n")
-    assert check_armored_payload(payload) == True
+    assert check_armored_payload(payload, outgoing=False) == True
+    assert check_armored_payload(payload, outgoing=True) == True
 
     payload = payload.removesuffix("\r\n")
-    assert check_armored_payload(payload) == True
+    assert check_armored_payload(payload, outgoing=False) == True
+    assert check_armored_payload(payload, outgoing=True) == True
 
     payload = """-----BEGIN PGP MESSAGE-----\r
 \r
@@ -295,7 +305,8 @@ HELLOWORLD
 -----END PGP MESSAGE-----\r
 \r
 """
-    assert check_armored_payload(payload) == False
+    assert check_armored_payload(payload, outgoing=False) == False
+    assert check_armored_payload(payload, outgoing=True) == False
 
     payload = """-----BEGIN PGP MESSAGE-----\r
 \r
@@ -303,7 +314,8 @@ HELLOWORLD
 -----END PGP MESSAGE-----\r
 \r
 """
-    assert check_armored_payload(payload) == False
+    assert check_armored_payload(payload, outgoing=False) == False
+    assert check_armored_payload(payload, outgoing=True) == False
 
     # Test payload using partial body length
     # as generated by GopenPGP.
@@ -345,4 +357,5 @@ myLbG7cJB787QjplEyVe2P/JBO6xYvbkJLf9Q+HaviTO25rugRSrYsoKMDfO8VlQ\r
 =6iHb\r
 -----END PGP MESSAGE-----\r
 """
-    assert check_armored_payload(payload) == True
+    assert check_armored_payload(payload, outgoing=False) == True
+    assert check_armored_payload(payload, outgoing=True) == True

chatmaild/src/chatmaild/turnserver.py

@@ -0,0 +1,9 @@
+#!/usr/bin/env python3
+import socket
+
+
+def turn_credentials() -> str:
+    with socket.socket(socket.AF_UNIX, socket.SOCK_STREAM) as client_socket:
+        client_socket.connect("/run/chatmail-turn/turn.socket")
+        with client_socket.makefile("rb") as file:
+            return file.readline().decode("utf-8")

cmdeploy/src/cmdeploy/__init__.py

@@ -128,6 +128,7 @@ def _install_remote_venv_with_chatmaild(config) -> None:
         "echobot",
         "chatmail-metadata",
         "lastlogin",
+        "turnserver",
     ):
         execpath = fn if fn != "filtermail-incoming" else "filtermail"
         params = dict(
@@ -497,6 +498,56 @@ def check_config(config):
     return config
 
 
+def deploy_turn_server(config):
+    (url, sha256sum) = {
+        "x86_64": (
+            "https://github.com/chatmail/chatmail-turn/releases/download/v0.3/chatmail-turn-x86_64-linux",
+            "841e527c15fdc2940b0469e206188ea8f0af48533be12ecb8098520f813d41e4",
+        ),
+        "aarch64": (
+            "https://github.com/chatmail/chatmail-turn/releases/download/v0.3/chatmail-turn-aarch64-linux",
+            "a5fc2d06d937b56a34e098d2cd72a82d3e89967518d159bf246dc69b65e81b42",
+        ),
+    }[host.get_fact(facts.server.Arch)]
+
+    need_restart = False
+
+    existing_sha256sum = host.get_fact(Sha256File, "/usr/local/bin/chatmail-turn")
+    if existing_sha256sum != sha256sum:
+        server.shell(
+            name="Download chatmail-turn",
+            commands=[
+                f"(curl -L {url} >/usr/local/bin/chatmail-turn.new && (echo '{sha256sum} /usr/local/bin/chatmail-turn.new' | sha256sum -c) && mv /usr/local/bin/chatmail-turn.new /usr/local/bin/chatmail-turn)",
+                "chmod 755 /usr/local/bin/chatmail-turn",
+            ],
+        )
+        need_restart = True
+
+    source_path = importlib.resources.files(__package__).joinpath(
+        "service", "turnserver.service.f"
+    )
+    content = source_path.read_text().format(mail_domain=config.mail_domain).encode()
+
+    systemd_unit = files.put(
+        name="Upload turnserver.service",
+        src=io.BytesIO(content),
+        dest="/etc/systemd/system/turnserver.service",
+        user="root",
+        group="root",
+        mode="644",
+    )
+    need_restart |= systemd_unit.changed
+
+    systemd.service(
+        name="Setup turnserver service",
+        service="turnserver.service",
+        running=True,
+        enabled=True,
+        restarted=need_restart,
+        daemon_reload=systemd_unit.changed,
+    )
+
+
 def deploy_mtail(config):
     # Uninstall mtail package, we are going to install a static binary.
     apt.packages(name="Uninstall mtail", packages=["mtail"], present=False)
@@ -673,6 +724,8 @@ def deploy_chatmail(config_path: Path, disable_mail: bool) -> None:
         packages=["rsync"],
     )
 
+    deploy_turn_server(config)
+
     # Run local DNS resolver `unbound`.
     # `resolvconf` takes care of setting up /etc/resolv.conf
     # to use 127.0.0.1 as the resolver.
@@ -727,6 +780,7 @@ def deploy_chatmail(config_path: Path, disable_mail: bool) -> None:
     # Deploy acmetool to have TLS certificates.
     tls_domains = [mail_domain, f"mta-sts.{mail_domain}", f"www.{mail_domain}"]
     deploy_acmetool(
+        email=config.acme_email,
         domains=tls_domains,
     )
 
@@ -765,7 +819,7 @@ def deploy_chatmail(config_path: Path, disable_mail: bool) -> None:
         if build_dir:
             www_path = build_webpages(src_dir, build_dir, config)
         # if it is not a hugo page, upload it as is
-        files.rsync(f"{www_path}/", "/var/www/html", flags=["-avz"])
+        files.rsync(f"{www_path}/", "/var/www/html", flags=["-avz", "--chown=www-data"])
 
     _install_remote_venv_with_chatmaild(config)
     debug = False
@@ -813,6 +867,13 @@ def deploy_chatmail(config_path: Path, disable_mail: bool) -> None:
         restarted=nginx_need_restart,
     )
 
+    systemd.service(
+        name="Start and enable fcgiwrap",
+        service="fcgiwrap.service",
+        running=True,
+        enabled=True,
+    )
+
     systemd.service(
         name="Restart echobot if postfix and dovecot were just started",
         service="echobot.service",

cmdeploy/src/cmdeploy/cmdeploy.py

@@ -19,7 +19,7 @@ from packaging import version
 from termcolor import colored
 
 from . import dns, remote
-from .sshexec import SSHExec
+from .sshexec import SSHExec, LocalExec
 
 #
 # cmdeploy sub commands and options
@@ -32,17 +32,30 @@ def init_cmd_options(parser):
         action="store",
         help="fully qualified DNS domain name for your chatmail instance",
     )
+    parser.add_argument(
+        "--force",
+        dest="recreate_ini",
+        action="store_true",
+        help="force reacreate ini file",
+    )
 
 
 def init_cmd(args, out):
     """Initialize chatmail config file."""
     mail_domain = args.chatmail_domain
+    inipath = args.inipath
     if args.inipath.exists():
-        print(f"Path exists, not modifying: {args.inipath}")
-        return 1
-    else:
-        write_initial_config(args.inipath, mail_domain, overrides={})
-        out.green(f"created config file for {mail_domain} in {args.inipath}")
+        if not args.recreate_ini:
+            print(f"[WARNING] Path exists, not modifying: {inipath}")
+            return 1
+        else:
+            print(
+                f"[WARNING] Force argument was provided, deleting config file: {inipath}"
+            )
+            inipath.unlink()
+
+    write_initial_config(inipath, mail_domain, overrides={})
+    out.green(f"created config file for {mail_domain} in {inipath}")
 
 
 def run_cmd_options(parser):
@@ -59,10 +72,12 @@ def run_cmd_options(parser):
         help="install/upgrade the server, but disable postfix & dovecot for now",
     )
     parser.add_argument(
-        "--ssh-host",
-        dest="ssh_host",
-        help="Deploy to 'localhost' or to a specific SSH host",
+        "--skip-dns-check",
+        dest="dns_check_disabled",
+        action="store_true",
+        help="disable checks nslookup for dns",
     )
+    add_ssh_host_option(parser)
 
 
 def run_cmd(args, out):
@@ -71,9 +86,10 @@ def run_cmd(args, out):
     ssh_host = args.ssh_host if args.ssh_host else args.config.mail_domain
     sshexec = get_sshexec(ssh_host)
     require_iroh = args.config.enable_iroh_relay
-    remote_data = dns.get_initial_remote_data(sshexec, args.config.mail_domain)
-    if not dns.check_initial_remote_data(remote_data, print=out.red):
-        return 1
+    if not args.dns_check_disabled:
+        remote_data = dns.get_initial_remote_data(sshexec, args.config.mail_domain)
+        if not dns.check_initial_remote_data(remote_data, print=out.red):
+            return 1
 
     env = os.environ.copy()
     env["CHATMAIL_INI"] = args.inipath
@@ -83,7 +99,7 @@ def run_cmd(args, out):
     pyinf = "pyinfra --dry" if args.dry_run else "pyinfra"
 
     cmd = f"{pyinf} --ssh-user root {ssh_host} {deploy_path} -y"
-    if ssh_host == "localhost":
+    if ssh_host in ["localhost", "@docker"]:
         cmd = f"{pyinf} @local {deploy_path} -y"
 
     if version.parse(pyinfra.__version__) < version.parse("3"):
@@ -93,14 +109,15 @@ def run_cmd(args, out):
     try:
         retcode = out.check_call(cmd, env=env)
         if retcode == 0:
-            print("\nYou can try out the relay by talking to this echo bot: ")
-            sshexec = SSHExec(args.config.mail_domain, verbose=args.verbose)
-            print(
-                sshexec(
-                    call=remote.rshell.shell,
-                    kwargs=dict(command="cat /var/lib/echobot/invite-link.txt"),
+            if not args.disable_mail:
+                print("\nYou can try out the relay by talking to this echo bot: ")
+                sshexec = SSHExec(args.config.mail_domain, verbose=args.verbose)
+                print(
+                    sshexec(
+                        call=remote.rshell.shell,
+                        kwargs=dict(command="cat /var/lib/echobot/invite-link.txt"),
+                    )
                 )
-            )
             out.green("Deploy completed, call `cmdeploy dns` next.")
         elif not remote_data["acme_account_url"]:
             out.red("Deploy completed but letsencrypt not configured")
@@ -122,11 +139,7 @@ def dns_cmd_options(parser):
         default=None,
         help="write out a zonefile",
     )
-    parser.add_argument(
-        "--ssh-host",
-        dest="ssh_host",
-        help="Run the DNS queries on 'localhost' or on a specific SSH host",
-    )
+    add_ssh_host_option(parser)
 
 
 def dns_cmd(args, out):
@@ -208,61 +221,6 @@ def test_cmd(args, out):
     return ret
 
 
-def proxy_cmd_options(parser: argparse.ArgumentParser):
-    parser.add_argument(
-        "ip_address",
-        help="specify a server to deploy to; can also be an inventory.py file",
-    )
-    parser.add_argument(
-        "--relay-ipv4",
-        dest="relay_ipv4",
-        help="The ipv4 address of the relay you want to forward traffic to",
-    )
-    parser.add_argument(
-        "--relay-ipv6",
-        dest="relay_ipv6",
-        help="The ipv6 address of the relay you want to forward traffic to",
-    )
-    parser.add_argument(
-        "--dry-run",
-        dest="dry_run",
-        action="store_true",
-        help="don't actually modify the server",
-    )
-
-
-def proxy_cmd(args, out):
-    """Deploy reverse proxy on a second server."""
-    env = os.environ.copy()
-    env["RELAY_IPV4"] = args.relay_ipv4
-    env["RELAY_IPV6"] = args.relay_ipv6
-    deploy_path = importlib.resources.files(__package__).joinpath("proxy-deploy.py").resolve()
-    pyinf = "pyinfra --dry" if args.dry_run else "pyinfra"
-
-    sshexec = args.get_sshexec()
-    # :todo make sure relay is deployed to args.relay_ipv4 and args.relay_ipv6
-
-    # abort if IP address == the chatmail relay itself: if port 22 is open AND /etc/chatmail-version exists
-    if sshexec.logged(call=remote.rshell.get_port_service, args=[22]):
-        if sshexec.logged(call=remote.rshell.chatmail_version):
-            out.red("Can not deploy proxy on the chatmail relay itself, use another server")
-            return 1
-        cmd = f"{pyinf} --ssh-user root {args.ip_address} {deploy_path} -y"
-        out.check_call(cmd, env=env)  # during first try, only set SSH port to 2222
-
-    cmd = f"{pyinf} --ssh-port 2222 --ssh-user root {args.ip_address} {deploy_path} -y"
-    try:
-        retcode = out.check_call(cmd, env=env)
-        if retcode == 0:
-            out.green("Reverse proxy deployed - you can distribute the IP address now.")
-        else:
-            out.red("Deploying reverse proxy failed")
-    except subprocess.CalledProcessError:
-        out.red("Deploying reverse proxy failed")
-        retcode = 1
-    return retcode
-
-
 def fmt_cmd_options(parser):
     parser.add_argument(
         "--check",
@@ -341,6 +299,15 @@ class Out:
         return proc.returncode
 
 
+def add_ssh_host_option(parser):
+    parser.add_argument(
+        "--ssh-host",
+        dest="ssh_host",
+        help="Run commands on 'localhost', via '@docker', or on a specific SSH host "
+             "instead of chatmail.ini's mail_domain.",
+    )
+
+
 def add_config_option(parser):
     parser.add_argument(
         "--config",
@@ -398,7 +365,9 @@ def get_parser():
 
 def get_sshexec(ssh_host: str, verbose=True):
     if ssh_host in ["localhost", "@local"]:
-        return "localhost"
+        return LocalExec(verbose, docker=False)
+    elif ssh_host == "@docker":
+        return LocalExec(verbose, docker=True)
     if verbose:
         print(f"[ssh] login to {ssh_host}")
     return SSHExec(ssh_host, verbose=verbose)

cmdeploy/src/cmdeploy/dns.py

@@ -7,13 +7,9 @@ from . import remote
 
 
 def get_initial_remote_data(sshexec, mail_domain):
-    if sshexec == "localhost":
-        result = remote.rdns.perform_initial_checks(mail_domain)
-    else:
-        result = sshexec.logged(
-            call=remote.rdns.perform_initial_checks, kwargs=dict(mail_domain=mail_domain)
-        )
-    return result
+    return sshexec.logged(
+        call=remote.rdns.perform_initial_checks, kwargs=dict(mail_domain=mail_domain)
+    )
 
 
 def check_initial_remote_data(remote_data, *, print=print):
@@ -48,14 +44,9 @@ def check_full_zone(sshexec, remote_data, out, zonefile) -> int:
     """Check existing DNS records, optionally write them to zone file
     and return (exitcode, remote_data) tuple."""
 
-    if sshexec == "localhost":
-        required_diff, recommended_diff = remote.rdns.check_zonefile(
-            zonefile=zonefile, verbose=False
-        )
-    else:
-        required_diff, recommended_diff = sshexec.logged(
-            remote.rdns.check_zonefile, kwargs=dict(zonefile=zonefile, verbose=False),
-        )
+    required_diff, recommended_diff = sshexec.logged(
+        remote.rdns.check_zonefile, kwargs=dict(zonefile=zonefile, verbose=False),
+    )
 
     returncode = 0
     if required_diff:

cmdeploy/src/cmdeploy/iroh-relay.toml

@@ -1,5 +1,11 @@
 enable_relay = true
 http_bind_addr = "[::]:3340"
-enable_stun = true
+
+# Disable built-in STUN server in iroh-relay 0.35
+# as we deploy our own TURN server instead.
+# STUN server is going to be removed in iroh-relay 1.0
+# and this line can be removed after upgrade.
+enable_stun = false
+
 enable_metrics = false
 metrics_bind_addr = "127.0.0.1:9092"

cmdeploy/src/cmdeploy/nginx/nginx.conf.j2

@@ -66,7 +66,7 @@ http {
 
 		index index.html index.htm;
 
-		server_name _;
+		server_name {{ config.domain_name }} www.{{ config.domain_name }} mta-sts.{{ config.domain_name }};
 
 		access_log syslog:server=unix:/dev/log,facility=local7;
 

cmdeploy/src/cmdeploy/opendkim/opendkim.conf

@@ -13,6 +13,7 @@ OversignHeaders		From
 On-BadSignature         reject
 On-KeyNotFound          reject
 On-NoSignature          reject
+DNSTimeout          60
 
 # Signing domain, selector, and key (required). For example, perform signing
 # for domain "example.com" with selector "2020" (2020._domainkey.example.com),

cmdeploy/src/cmdeploy/proxy-deploy.py

@@ -1,19 +0,0 @@
-import os
-
-import pyinfra
-from pyinfra import host
-
-from proxy import configure_ssh, configure_proxy
-
-
-def main():
-    ipv4_relay = os.getenv("IPV4_RELAY")
-    ipv6_relay = os.getenv("IPV6_RELAY")
-
-    configure_ssh()
-    if host.data.get("ssh_port") not in (None, 22):
-        configure_proxy(ipv4_relay, ipv6_relay)
-
-
-if pyinfra.is_cli:
-    main()

cmdeploy/src/cmdeploy/proxy.py

@@ -1,63 +0,0 @@
-import importlib
-
-from pyinfra import host
-from pyinfra.operations import files, server, apt, systemd
-
-def configure_ssh():
-    files.replace(
-        name="Configure sshd to use port 2222",
-        path="/etc/ssh/sshd_config",
-        text="Port 22\n",
-        replace="Port 2222\n",
-    )
-    systemd.service(
-        name="apply SSH config",
-        service="ssh",
-        reloaded=True,
-    )
-    apt.update()
-
-
-def configure_proxy(ipv4_relay, ipv6_relay):
-    files.put(
-        name="Configure nftables",
-        src=importlib.resources.files(__package__).joinpath("proxy_files/nftables.conf.j2"),
-        dest="/etc/nftables.conf",
-        ipv4_address=ipv4_relay,  # :todo what if only one of them is specified?
-        ipv6_address=ipv6_relay,
-    )
-
-    server.sysctl(name="enable IPv4 forwarding", key="net.ipv4.ip_forward", value=1, persist=True)
-
-    server.sysctl(
-        name="enable IPv6 forwarding",
-        key="net.ipv6.conf.all.forwarding",
-        value=1,
-        persist=True,
-    )
-
-    server.shell(
-        name="apply forwarding configuration",
-        commands=[
-            "sysctl -p",
-            "nft -f /etc/nftables.conf",
-        ],
-    )
-
-    if host.data.get("floating_ips"):
-        i = 0
-        for floating_ip in host.data.get("floating_ips"):
-            i += 1
-            files.template(
-                name="Add floating IPs",
-                src="servers/proxy-nine/files/60-floating.ip.cfg.j2",
-                dest=f"/etc/network/interfaces.d/{59 + i}-floating.ip.cfg",
-                ip_address=floating_ip,
-                i=i,
-            )
-
-        systemd.service(
-            name="apply floating IPs",
-            service="networking",
-            restarted=True,
-        )

cmdeploy/src/cmdeploy/proxy_files/60-floating.ip.cfg.j2

@@ -1,4 +0,0 @@
-auto eth0:{{ i }}
-iface eth0:{{ i }} inet static
-    address {{ ip_address }}
-    netmask 32

cmdeploy/src/cmdeploy/proxy_files/nftables.conf.j2

@@ -1,67 +0,0 @@
-#!/usr/sbin/nft -f
-
-flush ruleset
-
-define wan = eth0
-
-# which ports to proxy
-define ports = { smtp, http, https, imap, imaps, submission, submissions }
-
-# the host we want to proxy to
-define ipv4_address = {{ ipv4_address }}
-define ipv6_address = [{{ ipv6_address }}]
-
-table ip nat {
-        chain prerouting {
-                type nat hook prerouting priority dstnat; policy accept;
-                iif $wan tcp dport $ports dnat to $ipv4_address
-        }
-
-        chain postrouting {
-                type nat hook postrouting priority 0;
-
-                oifname $wan masquerade
-        }
-}
-
-table ip6 nat {
-        chain prerouting {
-                type nat hook prerouting priority dstnat; policy accept;
-                iif $wan tcp dport $ports dnat to $ipv6_address
-        }
-
-        chain postrouting {
-                type nat hook postrouting priority 0;
-
-                oifname $wan masquerade
-        }
-}
-
-table inet filter {
-        chain input {
-                type filter hook input priority filter; policy drop;
-
-                # Accept ICMP.
-                # It is especially important to accept ICMPv6 ND messages,
-                # otherwise IPv6 connectivity breaks.
-                icmp type { echo-request } accept
-                icmpv6 type { echo-request, nd-neighbor-solicit, nd-router-advert, nd-neighbor-advert } accept
-
-                # Allow incoming SSH connections.
-                tcp dport { 22, 2222 } accept
-                # Allow incoming shadowsocks connections.
-                tcp dport { 8388 } accept
-
-                ct state established accept
-        }
-        chain forward {
-                type filter hook forward priority filter; policy drop;
-
-                ct state established accept
-                ip daddr $ipv4_address counter accept
-                ip6 daddr $ipv6_address counter accept
-        }
-        chain output {
-                type filter hook output priority filter;
-        }
-}

cmdeploy/src/cmdeploy/remote/rshell.py

@@ -21,20 +21,6 @@ def shell(command, fail_ok=False, print=print):
         return ""
 
 
-def get_port_service(port: int) -> str:
-    return shell(
-        "ss -lptn 'src :%d' | awk 'NR>1 {print $6,$7}' | sed 's/users:((\"//;s/\".*//'"
-        % (port,)
-    )
-
-
-def chatmail_version():
-    version = shell("cat /etc/chatmail-version")
-    if "cat: /etc/chatmail-version:" in version:
-        version = None
-    return version
-
-
 def get_systemd_running():
     lines = shell("systemctl --type=service --state=running").split("\n")
     return [line for line in lines if line.startswith("  ")]

cmdeploy/src/cmdeploy/service/turnserver.service.f

@@ -0,0 +1,16 @@
+[Unit]
+Description=A wrapper for the TURN server
+After=network.target
+
+[Service]
+Type=simple
+Restart=always
+ExecStart=/usr/local/bin/chatmail-turn --realm {mail_domain} --socket /run/chatmail-turn/turn.socket
+
+# Create /run/chatmail-turn
+RuntimeDirectory=chatmail-turn
+User=vmail
+Group=vmail
+
+[Install]
+WantedBy=multi-user.target

cmdeploy/src/cmdeploy/sshexec.py

@@ -82,3 +82,19 @@ class SSHExec:
             res = self(call, kwargs, log_callback=remote.rshell.log_progress)
             print_stderr()
             return res
+
+
+class LocalExec:
+    def __init__(self, verbose=False, docker=False):
+        self.verbose = verbose
+        self.docker = docker
+
+    def logged(self, call, kwargs: dict):
+        where = "locally"
+        if self.docker:
+            if call == remote.rdns.perform_initial_checks:
+                kwargs['pre_command'] = "docker exec chatmail "
+                where = "in docker"
+        if self.verbose:
+            print(f"Running {where}: {call.__name__}(**{kwargs})")
+        return call(**kwargs)

cmdeploy/src/cmdeploy/tests/online/test_1_basic.py

@@ -2,6 +2,7 @@ import datetime
 import smtplib
 import socket
 import subprocess
+import time
 
 import pytest
 
@@ -31,6 +32,7 @@ class TestSSHExecutor:
         )
         out, err = capsys.readouterr()
         assert err.startswith("Collecting")
+        # XXX could not figure out how capturing can be made to work properly
         #assert err.endswith("....\n")
         assert err.count("\n") == 1
 
@@ -40,6 +42,7 @@ class TestSSHExecutor:
         )
         out, err = capsys.readouterr()
         lines = err.split("\n")
+        # XXX could not figure out how capturing can be made to work properly
         #assert len(lines) > 4
         assert remote.rdns.perform_initial_checks.__doc__ in lines[0]
 
@@ -69,7 +72,7 @@ def test_timezone_env(remote):
     for line in remote.iter_output("env"):
         print(line)
         if line == "tz=:/etc/localtime":
-            return True
+            return
     pytest.fail("TZ is not set")
 
 
@@ -146,6 +149,16 @@ def test_reject_missing_dkim(cmsetup, maildata, from_addr):
             s.sendmail(from_addr=from_addr, to_addrs=recipient.addr, msg=msg)
 
 
+def try_n_times(n, f):
+    for _ in range(n - 1):
+        try:
+            return f()
+        except Exception:
+            time.sleep(1)
+
+    return f()
+
+
 def test_rewrite_subject(cmsetup, maildata):
     """Test that subject gets replaced with [...]."""
     user1, user2 = cmsetup.gen_users(2)
@@ -158,7 +171,8 @@ def test_rewrite_subject(cmsetup, maildata):
     ).as_string()
     user1.smtp.sendmail(from_addr=user1.addr, to_addrs=[user2.addr], msg=sent_msg)
 
-    messages = user2.imap.fetch_all_messages()
+    # The message may need some time to get delivered by postfix.
+    messages = try_n_times(5, user2.imap.fetch_all_messages)
     assert len(messages) == 1
     rcvd_msg = messages[0]
     assert "Subject: [...]" not in sent_msg
@@ -209,8 +223,14 @@ def test_expunged(remote, chatmail_config):
 
 
 def test_deployed_state(remote):
-    git_hash = subprocess.check_output(["git", "rev-parse", "HEAD"]).decode()
-    git_diff = subprocess.check_output(["git", "diff"]).decode()
+    try:
+        git_hash = subprocess.check_output(["git", "rev-parse", "HEAD"]).decode()
+    except Exception:
+        git_hash = "unknown\n"
+    try:
+        git_diff = subprocess.check_output(["git", "diff"]).decode()
+    except Exception:
+        git_diff = ""
     git_status = [git_hash.strip()]
     for line in git_diff.splitlines():
         git_status.append(line.strip().lower())

cmdeploy/src/cmdeploy/tests/test_cmdeploy.py

@@ -26,10 +26,15 @@ class TestCmdline:
     def test_init_not_overwrite(self, capsys):
         assert main(["init", "chat.example.org"]) == 0
         capsys.readouterr()
+
         assert main(["init", "chat.example.org"]) == 1
         out, err = capsys.readouterr()
         assert "path exists" in out.lower()
 
+        assert main(["init", "chat.example.org", "--force"]) == 0
+        out, err = capsys.readouterr()
+        assert "deleting config file" in out.lower()
+
 
 def test_www_folder(example_config, tmp_path):
     reporoot = importlib.resources.files(__package__).joinpath("../../../../").resolve()